Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
In this package you will find Atomic clock. Please keep this manual handy as you use your new item. It contains practical step-by-step instructions, as well as technical specifications and precautions you should know. PRODUCT OVERVIEW FEATURES • Precise time and date set via RF signals from US Atomic Clock • Calendar displays date with month and weekday in English, Spanish or French • Indoor temperature display • Dual crescendo alarm with snooze • Blue backlight 21 MODE 2 SET SET A T O M I C C L O C K ZZDM F A C B GDE INTRODUCTION Thank you for selecting the Honeywell Atomic Alarm Clock with Temperature. This device includes precise time keeping and temperature monitoring features that you can use from the comfort of your home. In this package you will find Atomic clock. Please keep this manual handy as you use your new item. It contains practical step-by-step instructions, as well as technical specifications and precautions you should know. PRODUCT OVERVIEW FEATURES • Precise time and date set via RF signals from US Atomic Clock • Calendar displays date with month and weekday in English, Spanish or French • Indoor temperature display • Dual crescendo alarm with snooze • Blue backlight A PRECISE TIME WITH TEMPERATURE IN WWVB RADIO CONTROLLED TIME TWO-LINE LCD DISPLAY The NIST (National Institute of Standards and Technology) Views indoor temperature and precise time. radio station is located in Ft. Collins Colorado. It transmits an exact time signal continuously throughout the continentalB ALARM BUTTON United States at 60 KHz frequency. The Atomic Clock Sets alarms one and two and displays current alarm status. can receive this WWVB signal through its internal antenna from up to 2,000 miles away. Due to the nature of the Earth’sC MODE BUTTON ionosphere, reception can be limited during the daylight hours. 1). Changes display modes and confirms settings. The radio controlled clock will search for an alternate station 2). Sets the time manually. that derives its signal from the NIST Atomic clock in Boulder, Colorado. D UP ( ) BUTTON 1). Increases the setting. The WWVB tower icon on the main unit’s display will flash 2). Selects 12 or 24 hour format: indicating radio signal reception from the WWVB station. . 3). Sets Time Zone If the tower icon is not fully lit, or if the time is not setautomatically, please consider the following: E DOWN ( ) BUTTON 1). Decreases the setting. * During night-time hours, atmospheric disturbances are 2). Sets the weekday language typically less severe and reception may improve. A single daily reception is sufficient enough to keep F SNOOZE/LIGHT BUTTON the accuracy reading within 1 second. . Activates snooze function and LCD backlight. * Make sure the main unit is positioned at 8 feet minimum G BATTERY COMPARTMENT distance from any interference source such as a TV, Accommodates 2 (two) UM-3 or AA 1.5V alkaline batteries. computer monitor, microwave, etc. The successful reception of the atomic time signal depends on the positioning and BEFORE YOU BEGIN: location of the clock. Always place the unit by the 1. We recommend using alkaline batteries for your unit. window for better reception. 2. Avoid using rechargeable batteries. 3. Insert batteries before first use, matching the polarity * Within concrete wall rooms such as basements or office as shown in the battery compartment. buildings, the received signal may be weakened. Always place the unit near the window. BATTERY INSTALLATION: 1. Open the battery compartment door. 2. Install 2 batteries (UM-3 or “AA” size 1.5V) matching the polarity as shown in the battery compartment. 3. Replace the battery compartment door LOW BATTERY When the LCD becomes dim, battery replacement is required. 3 4 65 SETTING THE ALARM To set an alarm, 1. Press [ SET] once to display alarm time on the second line of the LCD display. The bell icon SET with digit 1 will appear. 2. Press and hold [ SET] for two seconds. The hour digit will flash. 3. Enter the hour using [ ] or [ ]. 4. Press [ SET] again. The minute digits will flash. 5. Enter the minutes using [ ] or [ ]. 6. Press [ SET] again to choose the snooze interval. 7. Enter the snooze interval in minutes using [ ] or [ ]. 8. Press [ SET] the last time to exit. 9. Repeat the same procedure to set the second alarm. SNOOZE When the alarm sounds, press the SNOOZE/LIGHT button to temporarily stop the alarm. If not disabled, the alarm soundwill resume after 5 minutes. If the alarm is not disabled after that, it will sound for4 more minutes and then will stop by itself. DISABLING ALARM 1. Press [ SET] button to disable alarm 1.2. Repeat the same procedure to disable alarm 2. ALARM * Two Single Day AlarmsThe alarm will sound and the alarm icon will flash at the set time. ATOMIC CLOCK 1. After the batteries are installed, the WWVB time signal receiver will automatically search for the time signal. This takes about 5-8 minutes. 2. If the radio signal is received, the date and time will be set automatically, and t...