Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
• Holding down + or – changes the flashing digits at high speed. • You can set the year in the range of 2000 to 2069. The day of the week is set automatically in accordance with the date setting. • Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00. • Each press of + or – while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour and 24-hour timekeeping. (–) Decrease (+) Increase 3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen. • The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about five minutes without performing any operation. USING THE ALARM The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (6) to select the snooze alarm feature. Setting the Alarm Time Use the + and – buttons (2 3) to set the alarm time. Pressing the + and – buttons (2 3) causes the alarm time to appear in place of the date on the display. • Holding down + or – changes the digits at high speed. (–) Decrease (+) Increase Turning the Alarm On and Off Use the Alarm Mode selector (6) to turn the alarm on and off, and to select the snooze feature. • The alarm time appears in place of the date on the display whenever the Alarm Mode selector (6) is set to ON or SNZ. • The alarm sound changes over four levels as it sounds. Stopping the Alarm • When the alarm is sounding, press the SNOOZE button (7) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes. • To turn off the snooze feature, slide the Alarm Mode selector (6) to OFF. Demo Alarm Press the DEMO button (4) to sound the alarm. THERMOMETER FUNCTIONS • Display Range: –19.9°C (Under: LL) to 49.9°C (Over: HH) • Guaranteed Range: 0°C to 40°C HYGROMETER FUNCTIONS • Display Range: 20% (Under: LL) to 90% (Over: HH) • Sensor Precision: ±10% when temperature is 0°C to 40°C. USING THE STAND You can pull the stand out of the back of the clock to support it during use. When re-folding the stand, press until you feel it click into place. USING THE STRAP HOLE A hole is provided for a strap that you can use while carrying the clock. • The clock does not come with a strap. USING THE SPECIAL CASE Use of a separately available special case is recommended to protect the clock against damage when carrying it in a bag, etc. BATTERY REPLACEMENT Replace the battery whenever the display becomes dim and difficult to read. To replace the battery 1. Turn over the clock, pull out the battery holder and remove the old battery. 2. Place a new battery onto the holder, making sure that its positive (+) side is facing upwards (towards the back of the clock). Loading the battery incorrectly can cause it to burst and damage the clock. 3. Slide the battery holder back into the clock. 4. Press the RESET button (1). Always be sure to press the RESET button (1) after replacing the battery. Battery precautions • Keep batteries out of the reach of small children. If a battery is swallowed accidentally, contact your physician immediately. • Be sure to load the battery with its positive (+) side is facing upwards (towards the back of the clock). • Never charge the battery that comes with the clock. • Should a battery ever leak while in the clock, wipe out the fluid with a cloth, taking care not to get any onto your skin. • Replace the battery at least once a year, even if it is still supplying power. • The battery that comes with the...