Login:
Stimmen - 3, Durchschnittliche Bewertung: 5 ( )

Anleitung Orbit Manufacturing, modell Fluid 91912

Hersteller: Orbit Manufacturing
Dateigröße: 1.71 mb
Dateiname:
Unterrichtssprache:enes
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


• With the dial in the AUTO position press the MANUAL button. • Press the NEXT button. • The display reads “MANUAL ALL” to the right of the letters “A” and “B.” • Press the ENTER button. Each station with a set duration will water in sequence. To quickly advance from one station to the next press NEXT . To abort this process before the manual watering is finished, press CLEAR . Otherwise, the timer will automatically exit the “MANUAL ALL” mode after all stations have run. Manual Watering - Program A: This will allow you to water only those stations with set durations in Program A. • With the dial in the AUTO position press the MANUAL button. • Press the NEXT button until the display reads “A MANUAL ALL”. • Press the ENTER button. Each station will water, in sequence, one after another, for the same duration specified in Program A. To quickly advance from one station to the next press NEXT . To abort this process before the manual watering is finished, press CLEAR . Otherwise, the timer will automatically exit the “A – MANUAL ALL” mode after all Program A stations have run. C C C Manual Watering - Program B: This will allow you to water only those stations with set durations in Program B. • With the dial in the AUTO position press the MANUAL button. • Press the NEXT button until the display reads “B MANUAL ALL”. • Press the ENTER button. Each station will water, in sequence, one after another, for the same duration specified in Program B. To quickly advance from one station to the next press NEXT . To abort this process before the manual watering is finished, tpress CLEAR . Otherwise, the timer will automatically exit the “B – MANUAL ALL” mode after all Program B stations have run. Manual Watering - Single Stations: This will allow you to water a single station at a time. • With the dial in the AUTO position press the MANUAL button. • Press the NEXT button until the display reads “MANUAL STATION 1”. • Press the NEXT button to select the station number you want to water. • Press the or buttons to select the number of min- utes to water that station (from 1 to 120 minutes). • Press the ENTER button. To abort this process before the manual watering is finished, press CLEAR . Otherwise, the timer will automatically exit the “MANUAL – STATION” mode after the selected station has run. Rain Delay Function: You can press the RAIN DELAY button to stop all programmed watering from taking place for a certain number of hours or days (for instance, after a rain storm). • With the dial in the AUTO position press the RAIN DELAY button. • Press the or buttons to change the rain delay period. The options are: 24 hours, 48 hours, 72 hours, 4 days, 5 days … and up to 99 days in one-day increments. • Press the ENTER button to enter the rain delay mode. The Rain Delay hours remaining will show on the display. The timer will revert to the programmed schedule at the expiration of the rain delay period. To return to the programmed schedule before the expiration of the rain delay period, press the CLEAR button. Manual Advance During Watering: • Pressing the NEXT button will advance watering from C C C the current station to the next station in the cycle. This can be done during scheduled, manual, or remote actuated watering. Section 4: Using the Remote Control Device NOTE: The timer will accept commands from the remote control device only when the selection dial is turned to AUTO or OFF. (If the selection dial is turned to any other setting, commands from the Remote Control Device will be stored in memory and executed when the selection dial is turned to AUTO). Install a Battery in the Remote Control Device: • Open the battery compartment door. • Install a 9-volt battery in the battery compartment. • Replace the battery compartment door. To Synchronize the Remote Control Device with the Timer: The remote device provided with your timer is already synchronized to your timer. If the remote is not functioning properly or if you are adding a new remote or RF sensor to ...

Dieses Handbuch ist für folgende Modelle:
Time Clocks - Fluid 57912 (1.71 mb)
Time Clocks - Fluid 57916 (1.71 mb)
Time Clocks - Fluid 57922 (1.71 mb)
Time Clocks - Fluid 57926 (1.71 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien