Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: La Crosse Technology Dateigröße: 842.44 kb Dateiname: Unterrichtssprache:

After unpacking the device, immediately check to determine that all listed items are present and that the device is in a faultless condition. Remove all packagng materials and the protective foil from the display. Operating Elements q Projection lens w Telescopic antenna e Switch ALARM ON/OFF/AUTO r Button SNOOZE t Waveband selector FM/AM y Button PROJECTION LIGHT, Display illumination u Switch PROJECTION ON/OFF i Display o Sound volume regulator OFF/BUZZ/VOLUME a Connection for 3V power adapter s Frequency scale d TUNING regulator f Button TIME g Button ALARM h Button MIN (Minute) j Button HOUR (Stunde) k Battery compartment l Projection focus (FOCUS) - 5 Technical Data This device has been tested and approved in accordance with the basic requirements and other relevent regulations of the EMC guidelines 2004/108/EC as well as the guidelines for low voltage devices 2006/95/EC. Battery operation: KH2198: 3 x 1.5 V Type Micro / AAA / LR03 (not supplied) for radio operation, display illumination and projection. KH2199: 3 x 1.5 V Type Mignon / AA / LR06 (not supplied) for radio operation, display illumination and projection. Operating voltage : 3 V (Radio operation/Projection), 1.5 V (hour) Frequency range : FM (USW) : 87,5–108,0 MHz AM (MW) : 530–1600 kHz Mains adapter: (Mains adapter not supplied) Input voltage: 230 V ~ 50 Hz Output voltage: DC 3V (+/- 5%) Rated current: min. 300 mA Polarity: Even when using 3 V mains adapter, a battery must be inserted. Otherwise, the clock will not function. For Model KH2198: Insert the single battery into the upper part of the battery compartment k. The two other batteries, one above the other, power radio operation and the projection. For Model KH2199: Insert the single battery into the compartment marked “CLOCK USE”. - 6 Important: Ensure that you have the correct polarities with the batteries and the power adapter. False polarity will damage the device. The device can be operated as follows: • only with batteries , • with a mains power adapter and a battery for the clock. Inserting the batteries KH2198: You require three 1.5 V batteries of the type Micro / AAA / LR03. 1. Open the cover of the battery compartment k on the underside. 2. Insert the three batteries into the battery compartment k, paying heed to the polarity markings shown in the battery compartment k. Ensure that the black textile strip is positioned under the batteries, this will make future battery exchanges easier. 3. Close the cover, ensuring that it engages. KH2199: You require three 1.5 V batteries of the type Mignon / AA / LR06. 1. Open the cover of the battery compartment k on the underside. 2. Insert the three batteries into the battery compartment k, paying heed to the polarity markings shown in the battery compartment k. 3. Close the cover, ensuring that it engages. - 7 Placing • Place the projection clock onto a level surface. • Position the projection clock such that the projection lens q is directed onto an empty surface. The distance from the projection lens to the projection area (ceiling or wall) must lie between 0,4 m and 3 m. With KH2198: Projection of the time must be directed to an area lying behind the projection alarm clock. Otherwise, the time will be shown back to front. With KH2199: Projection of the time must be directed to an area lying in front of the projection alarm clock. Otherwise, the time will be shown back to front. Operation Connect the external mains adaptor This device can be operated with an external mains adaptor. Please use only mains adaptors that meet these specifications: Input voltage: Output voltage: Rated current: Polarity: 230 V ~ 50 Hz DC 3V (+/- 5%) min. 300 mA Attention: Make certain that the polarity is correct – both for the batteries as well as for the mains adaptor. Take note of the markings on the 3V direct current connection a . False polarity will damage the device. - 8 Radio operation 1. Slide the switch ALARM ...

Herunterladen

Geben Sie zwei Ziffern: