Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
To enable / disable signal reception: Press and hold to enable or to disable signal reception. NOTE Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal. Clock signal reception indicator: STRONG SIGNAL WEAK SIGNAL NO SIGNAL MANUALLY SET CLOCK To set the clock manually, disable the signal reception fi rst. 1. Press and hold SET CLOCK. 2. Press or to change the settings. 3. Press SET CLOCK to confi rm. 4. The settings order is: time zone offset, 12/24 hr format, hour and minute. DP200: Time zone offset sets the clock +/- 23 hours from the received clock signal time. LCD DISPLAY Wave your hand at least 3 inches above the IR motion sensors to toggle display modes between: • Clock • Alarm • Outdoor temperature • Indoor temperature ALARM To set the alarm: 1. Press and hold SET ALARM. 2. Press / to set hour / minute. 3. Press SET ALARM to confi rm. indicates alarm is ON. To toggle alarms ON / OFF: 1. Press SET ALARM to display alarm time. 2. Press ALARM ON / OFF to turn alarm ON / OFF. To silence the alarm: • Wave your hand above the IR motion sensors to silence it for 8 minutes. OR • Press ALARM ON / OFF to turn the alarm off and activate it again after 24 hours. PROJECTION The ultra-bright LED enables daylight projection of time and temperature information. To activate projection: Slide PROJECTION to AUTO or CLOCK. • Slide to AUTO to toggle between current time and indoor / outdoor temperature. • Slide to CLOCK to project current time only. To adjust the projection image: • Press 180° ROTATION to rotate the image by 180°. • Focus the projector image by turning the FOCUS wheel. NOTE The installed CDS light sensor inside the unit will activate automatic projection / display dimming. NOTE If projection is illuminated, do not look directly into the projector. Oregon Scientifi c will not be held responsible for any results or consequences arising from the misuse of this product. TEMPERATURE To toggle temperature unit: Press °C / °F. NOTE Please keep the temperature sensor (adjacent to the adaptor socket) away from the main unit or electrical devices as heat from these devices will affect accurate indoor temperature readings. RESET Press RESET to return to the default settings. PRECAUTIONS • Do not subject the unit to excessive force, shock, dust, temperature or humidity. • Do not cover the ventilation holes with any items such as newspapers, curtains etc. • Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. • Do not clean the unit with abrasive or corrosive materials. • Do not tamper with the unit’s internal components. This invalidates the warranty. • Only use fresh batteries. Do not mix new and old batteries. • Images shown in this manual may differ from the actual display. • When disposing of this product, ensure it is collected separately for special treatment. • Placement of this product on certain types of wood may result in damage to its fi nish for which Oregon Scientifi c will not be responsible. Consult the furniture manufacturer's care instructions for information. • The contents of this manual may not be reproduced without the permission of the manufacturer. • Do not dispose old batteries as unsorted municipal waste.Collection of such waste separately for special treatment is necessary. • Please note that some units are equipped with a battery safety strip. Remove the strip from the battery compartment before fi rst use. NOTE The technical specifi cations for this product and the contents of the user manual are subject to change without notice. SPECIFICATIONS TYPE DESCRIPTION MAIN UNIT L x W x H 85 x 90 x 90 mm (3.35 x 3.54 x 3.54 in) Weight 510 g (17.99 oz) without battery Indoor temperature range 0°C to 50°C (32°F to 122°F) Outdoor temperature range -30°C to 60°C (-22°F to 140°F) Resolution 0.1°C (0.2°F) Signal frequency 433 MHz Main power supply DC 5.0V power adapter Back-up power supply 1 x CR2032 3 V battery REMOTE UNIT (THN132N) L x W x H 92 x 60 x 20 mm (3.6 x 2.4 x 0.8 in) Weight 62 g (2.22 oz) Transmission range 30 m (98 ft) unobstructed Temperature range -30°C to 60°C (-22°F to 140°F) Power 1 x UM-4 (AA) 1.5 V batteries ABOUT OREGON SCIENTIFIC Visit our website (c.com) to learn more about Oregon Scientifi c products. If you’re in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientifi c.com/service/ support OR Call 1-800-853-8883. For international inquiries, please visit: www2. oregonscientifi c.com/about/international FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifi cations not expressly approved by the party responsible for compliance could void the use...
Dieses Handbuch ist für folgende Modelle:Time Clocks - DP200 (653.45 kb)