Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Oregon Scientific Dateigröße: 1.46 mb Dateiname: Unterrichtssprache:

Press and hold CLOCK ALARM for 2 seconds to enter the Alarm Setting Mode. 2. Alarm 1 will start flashing. Use the and buttons to toggle between alarm 1 and 2. Then press CLOCK ALARM to select alarm 1 or 2. The hour will start flashing. 3. Enter the value by pressing the or buttons. 4. Confirm the entry by pressing the CLOCK ALARM button and move on to the next setting. 5. Repeat (3 and 4) to set alarm 1 / alarm 2 - minute, melody alarm and / or vibration alarm (optional). If the melody alarm is selected, repeat (3 and 4) to select the melody / beep alarm sound and volume. 6. The daily alarm will be on automatically after setting. Press CLOCK at any time to exit the Alarm Setting Mode. ACTIVATING / DEACTIVATING THE ALARM(S) • Press the CLOCK ALARM button to toggle between alarm 1 and alarm 2 ON / OFF. • When the melody or vibration alarm icons appear on the display the alarm is activated. When the icons do not appear the alarm is deactivated. ALARM SOUND When activated, the alarm icon flashes, the backlight will come on for 8 seconds and the alarm melody or beep sound will play. If no key is pressed the alarm will play for 2 minutes. NOTE See "Setting the Alarm(s)" section to choose the alarm melody / beep alarm and / or the vibration alarm. SNOOZE / TURNING THE ALARM OFF To silence the alarm: • Press SNOOZE / LIGHT to silence it for 8 minutes. The alarm 1 or alarm 2 icon will flash to show snooze is enabled. Press and hold for 2 seconds to turn off snooze. OR • Press any key except SNOOZE / LIGHT to mute the alarm and activate it again in 24 hours. 15 RMR939PA English R5 15 9/21/04, 2:40 PM EN NOTE If no button is pressed, the alarm will automatically silence after 2 minutes. It will then sound again in 24 hours. MOTION ALARM MOTION ALARM SETTING DISPLAY The motion sensor icon indicates the motion alarm setting. 1 2 1. Code icon 2. Motion Sensor icon 16 SETTING THE MOTION ALARM The motion alarm has a security / monitoring function, whereby when the motion sensor detects movement, it sets off the clock alarm for 5 minutes and the backlight will turn on for 10 seconds. The clock will also show which sensor has been activated -Ch.1 or Ch.2 will appear in the top left hand corner of the display. You can set the motion alarm to be activated over a set period of time i.e. during night time, by entering values next to the Start / Stop Hour in the process detailed below. However, it is important that you set the Code on the clock display to match the Code on the back of the motion sensor(s) so that the items can interact with each other. This process is also detailed below. 1. Press and hold MOTION ALARM for 2 seconds to enter the Motion Alarm Setting Mode. 2. The Code will start flashing. Use the and buttons to choose the same Code setting as that displayed on the back of the motion sensor. Then press MOTION ALARM to select your chosen option. The start hour digits will start flashing. 3. Enter the value by pressing the or buttons. 4. Confirm the entry by pressing the MOTION ALARM button and move on to the next setting. 5. Repeat (3 and 4) to set the stop hour, beep / melody and volume. 6. The motion alarm will be on automatically after setting. RMR939PA English R5 16 9/21/04, 2:40 PM EN Press CLOCK or CLOCK ALARM at any time to exit the Motion Alarm Setting Mode. TURNING THE MOTION ALARM OFF Press any button on the clock to turn the motion alarm off. It will sound again when the remote motion sensor unit detects a motion again. SLEEP TIMER You can choose 1 of 6 soothing sounds to play for a set time while you fall asleep: • Bird • Wind • River • Raindrop • Waterfall • Ocean Wave To set the sleep timer and soothing sound volume: 1. Press the SOUND / SLEEP button once. The soothing sound will turn on and the sleep timer will display the last setting. 2. Press the SOUND / SLEEP button to set the sleep timer to turn off after 120 90 60 30 15 or 0 minutes. When 0 minutes is selected the soothing sound will automatically turn off after a few seconds. 3. Use the or buttons to change the soothing sound volume. 4. SOUND will flash on the LCD display to indicate that the sleep timer is activated. To select the soothing sound: 1. Press and hold the SOUND / SLEEP button for 2 seconds when the soothing sound is on. The soothing sound number will flash. 17 RMR939PA English R5 17 9/21/04, 2:40 PM EN 2. Use the or buttons to change the type of soothing sound. 3. Press the SOUND / SLEEP button to confirm the setting. PROJECTION UNIT The projection unit can display both time and alarm status. To use this feature: • Slide the PROJECTION switch to ON to activate continuous projection. However, this function will not work unless the AC / DC adaptor is used. • Adjust the FOCUS knob to make the image clearer. • Adjust the IMAGE ROTATION knob to rotate the image clockwise or anti-clockwise. • Manually tilt the projection unit to position the image or press the 180° ROTATION button to reverse the image and turn it upside down. NOTE You c...

Herunterladen

Geben Sie zwei Ziffern: