Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Press SELECT to switch between options. CLOCK This product can automatically synchronize the date and time with official time-keeping organizations in Frankfurt, Germany (PS-S01) or Rugby, England (PS-S01U). When the unit is within 1500 km (932 miles) of a RF signal, the reception icon will blink during reception. 6 EN RECEPTION Reception takes 2 – 10 minutes to complete. Once complete, the icon will stop blinking. Strong signal Weak signal No signal NOTE For best results, place the unit away from metal or electrical objects, and near a window with a clear view to the sky. TO DISABLE OR ENABLE AUTO-SYNCHRONIZATION In Clock mode, press DOWN for 2 seconds to disable the auto-synchronization. The unit will not respond to radio signals until you reactivate the synchronization. To enable auto-reception, press UP for 2 seconds. SET OR CHANGE THE CLOCK 1. Press SELECT to switch to the Clock Mode. The time will flash. 2. Press and hold SELECT for 2 seconds to enter the setting mode. 3. Select the 12/24-hour format, hour, and minute. Press UP or DOWN to change the setting. Press SELECT to confirm. 7 EN ALARM When activated, the Beep Alarm starts quietly, then gradually becomes louder. It shuts off after two minutes. The LCD display lights up for the first 8 seconds. SET ALARM 1. Press SELECT several times until the Alarm area flashes. 2. Press and hold SELECT for 2 seconds to enter the setting mode. 3. Select the hour and minute. Press UP or DOWN to change the setting. Press SELECT to confirm. 4. Press SELECT again when you are finished. SNOOZE Press the SNOOZE/ LIGHT button the top of the unit to temporarily disable the alarm for 8 minutes. The alarm icon will blink while Snooze is activated. TO TURN THE ALARM OFF OR ON Press any button to stop the alarm. To turn the alarm off completely (deactivate it for the next day), press ALARM. CALENDAR SET DATE Clock auto-synchronization must be deactivated before you manually set the date. ( 7) 8 EN 1. Press SELECT several times until the calendar area flashes. 2. Press and hold SELECT for 2 seconds to enter the calendar setting mode. 3. Select the year, month, date, and language. Press UP or DOWN to change the setting. Press SELECT to confirm. NOTE The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish. BAROMETER This product tracks barometric pressure changes over the past 24 hours to provide the weather forecast ( 11) and a trend line showing the direction of barometric change. 9 EN BAROMETRIC END The barometric trend arrow for the last 30 minutes is always displayed. Trend Description Pressure change (mb/hPa) 1 hr 6 hrs Rising +1 +3 Steady Steady Steady Falling -1 -3 VIEW THE LAST 24 HOURS Press SELECT 2 times until the Barometer Area flashes. Then, press UP or DOWN to view the last 24 hours history. SET UNIT AND ALTITUDE You can set the unit of measurement (mb/hPa or inHg) and altitude. Setting the altitude allows the product to take more accurate barometric measurements. 1. Press SELECT 2 times until the Barometer Area flashes. 2. Press and hold SELECT for 2 seconds. 3. Select altitude (-100 meters to 2500 meters in increments of 10) and the unit of measurement (mb/hPa or inHg). Press UP or DOWN to change the setting. Press SELECT to confirm. 10 EN WEATHER FORECAST This product forecasts the next 12 to 24 hours of weather within a 30 to 50 km (19 - 31 mile) radius with 70 to 75 percent accuracy. The weather forecast is always displayed. Clear Partly Cloudy Cloudy Rainy BACKLIGHT Press SNOOZE/ LIGHT to illuminate the backlight for 5 seconds. RESET SYSTEM The RESET button is located in the battery compartment. Press it with the tip of a blunt object (such as a ballpoint pen) whenever you change the batteries, or whenever performance is not behaving as expected (e.g., unable to establish radio frequency link with automatic clock, etc.) This will return all settings to default value (barometric pressure history, alarm setting, etc.) 11 EN SAFETY AND CARE Wash the unit with a slightly damp cloth and mild detergent. Avoid dropping the unit or placing it in a high-traffic location. WARNINGS This product is designed to give you years of service if handled properly. Observe the following guidelines: • Never immerse the unit in water. This can cause electrical shock and damage the unit. • Do not subject the main unit to extreme force, shock, or fluctuations in temperature or humidity. • Do not tamper with the internal components. • Do not mix new and old batteries or batteries of different types. • Do not use rechargeable batteries with this product. • Remove the batteries if storing this product for a long period of time. • Do not scratch the LCD display. • Do not make any changes or modifications to this product. Unauthorized changes may void your right to use the product. • The content of this user guide is subject to change without notice. • Images not drawn to scale. TROUBLESHOOTING Check here before contacting our customer service depar...
Dieses Handbuch ist für folgende Modelle:Time Clocks - STARCK PS-S01U (92.47 kb)