Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
To ensure that it can provide you with the years of service for which it is designed, be sure to read this manual carefully and follow the instructions contained herein. Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss suffered by you or any third party arising through the use of this product or its malfunction. Low Battery Warning ®4 №8so\ & 'Up Recoverindicator About This Manual nr If you use the light or alarms a number of times during a short period, a R (recover) indicator will flash on the display and the following operations become disabled as the battery level recovers. • Pedometer functions • Alarm and hourly time signal • Illumination Normal operation should return after the battery level recovers, but if the R indicator appears frequently you should have the watch’s battery replaced. » Button operations are indicated using the letters shown in the illustration. » Each section of this manual provides you with the information you need to perform operations in each mode. HP General Guide * Use © to navigate between modes. * Holding down © for about three seconds in any mode will return to the Timekeeping Mode. * Pressing L in any mode will illuminate the display. Timekeeping Mode Stopwatch Mode Recall Mode Countdown Timer Mode Alarm Mode World Time Mode TUE IO:S8sa) b-3B к Setting the Time and Date PM indicator (no indicatorforAM) нова. -.. misé I Use the following procedure to set the current time and date after having the watch’s battery replaced, etc. World Time Mode times will not be displayed correctly unless you configure your Home Time settings (the time in the city where you normally will use the watch) correctly. • If you to use the watch in Japan, select TYO (Tokyo) as your Home Time. To set the time and date 1. In the Timekeeping Mode, hold down A for about two seconds until the seconds digits start to flash. This is the setting screen. Month -Day Hour: Minutes Seconds (middle area) 2. Use © to move the flashing to the time, date, or Home City setting as shown above, and then use ® (+) and B (-) to change the flashing setting. • Holding down ® or B will change the selected setting at high speed. Setting To do this: Do this: Seconds Reset to 00 Press ©. Summer Time (DST) Toggle between standard time (OFF) and daylight saving time (ON) Press ©. Home City Change the Home City setting (See the “City Code Table”.) Use © (east) and (B (west). Hour, Minute Change the hour or minute setting Use © (+) and ® (-). 12/24-hour Timekeeping Toggle between 12-hour and 24-hour timekeeping Press ©. Year, Month, Day Change the year, month, or day setting Use © (+) and ® (-). 3. After all of the settings are the way you want, press A twice to exit the setting screen. • The watch also will exit the setting screen automatically if you do not perform any operation for about two or three minutes. • When setting the hour, make sure you specify AM (no indicator) or PM (P) correctly, or that you specify the correct 24-hour time. » Resetting the seconds to 00 while the current count is in the range of 30 to 59 causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are reset to 00 without changing the minutes. » Resetting the zero count to zero on an accurate time signal about once a month helps to ensure accurate timekeeping. » You can set a date in the range of January 1, 2000 to December 31, 2099. • The day of the week is set automatically in accordance with the date you set. » The watch makes adjustments for leap years and month lengths automatically. » Summer time, or Daylight Saving Time (DST) as is it is called in some countries, calls for setting clocks ahead one hour during the summer season. Note that the use of summer time depends on the country and even the local area. Stopwatch The Stopwatch Mode lets you measure elapsed time, and record lap/split times. A sensor built into the watch counts your steps while a stopwatch elapsed time operation is in progress. The watch uses this information to calculate the energy you consume, the distance you cover, and your average pace in accordance with personal information you pre-register. For each elapsed time operation, the watch creates a record in memory to record the date, lap/split times, distance covered, energy consumption, number of steps, and other information. Stopwatch • Minimum Measuring Unit: 1/100 second • Maximum Measuring Time: 99:59'59.99'' • Lap/Split Count: 999 Elapsed Time Measurement • Workout Time • Distance Covered • Energy Consumption • Average Pace (*) • Number of Steps Workout Data (Maximum Cumulative Values) • Laps/splits: 150 • Cumulative Distance: 999.9 km/621.1 miles • Cumulative Energy Consumption: 23900.5kcal / 99999.9kJ • Average Pace: 220 (*) • Cumulative Number of Steps: 999999 • Cumulative Exercise Time: 9999 hours, 59 minutes • Best Lap • Average Pace • The average pace value shows your aver...