Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
PressthetabtoFeatures • RadiocontrolledclockreceivessignalfromWWVB60kHzandadjuststimeanddate2 Install Batteries 1. Pressthetabto 6:00 a.m. It stops the update once the time is updated for the day. n Notes: • The radio signal search takes approximately 10 minutes after batteries are installed or when RESET is pressed. If you want to set the time and date manually, press )/WAVE to stop signal search at any time. • The clock automatically adjusts the daylight saving time (DST) upon receipt of a signal, and displays. If you are in an area that does not recognize DST, change the time zone on your clock until it matches the correct hour. • During the radio signal search, all function keys stop working except SNOOZE/LIGHT. • Signal reception might be affected if your clock is placed in a basement or anywhere near large metal structures (tall buildings, freeways, airports, or railways). • On very cloudy and stormy days, the radio signal might not be strong enough to set the clock. )/WAVE • Increasesettingsinthetimeandalarmmodes. • Inthenormaltimedisplay,pressfor3secondsSNOOZE/LIGHT • Presstoturnonthebacklightfor5seconds. • Whenthealarmsounds, pressoncetostopthealarmfor5minutes. ALM/SET ALARM ON/OFF Turnalarmonoroff. TIME/SET Settime,year,month, date,andtemperaturereading. (/ZONE • Decreasesettingsinthetimeandalarmmodes. • Selectthedesiredtimezone. Set alarm or switch between viewing the month/date and alarm time. 3 Set Time and Date Automatic Settings 1. After batteries are installed, the clock starts searching for the WWVB signal from the atomic clock in Fort Collins, Colorado. . One of the signal reception indicators flashes during signal search. Weakest Weaker Weak Normal Strongest . If reception succeeds, date and time are updated automatically, and displays until the next reception cycle. If the reception fails, no signal indicator appears. Hold down )/WAVE for 3 seconds to receive signal manually. If it still fails, follow “Manual Settings” on page 8 to set the date and time. The clock automatically updates the atomic time daily at 3:00 a.m., 4:00 a.m., 5:00 a.m., or remove the battery compartment cover. . Insert two AA batteries (not included) matching the polarity symbols (+ and –) marked inside. . Replace the cover. Replace batteries when the display dims. Battery Notes • Dispose of batteries promptly and properly. Do not burn or bury them. • Use only fresh batteries of the required size and type. • Do not mix old and new batteries, different types of batteries (alkaline, or rechargeable), or rechargeable batteries of different capacities. • If you do not plan to use the atomic clock, remove the batteries. Batteries can leak chemicals that can damage electronic parts. User’s Guide - Atomic Alarm Clock Thank you for purchasing your Atomic Alarm Clock from RadioShack. Please read this user’s guide before installing, setting up, and using your new clock. automatically. • LED backlight. • 4 time zone settings. • Daylight saving time. • Alarm and snooze function. • Indoor temperature with Celsius or Fahrenheit option. Check package contents • Atomic Clock • Quick Start • User’s Guide 1 Select a Location • Place your clock near a window. • Do not place in direct sunlight, next to heat or cold sources such as stoves and freezers, or heating vents. • Keep the clock away from high power cables, TVs, microwaves, refrigerators, computers, and metal furniture. • Your atomic clock will not work in Alaska or Hawaii. to activate the manual signal search. Press again to turn it off. Signal Reception Indicator Snooze On Clock Time 12 or 24 hour format. Alarm On Daylight Saving Indicator Time Zone Temperature .C or .F Month and Day or Alarm Time Day of the Week Manual Settings 1. Press (/ZONE to select the time zone P (Pacific), M (Mountain), C (Central), or E (Eastern). . Hold down TIME/SET until 12 Hr flashes. . Press )/WAVE or (/ZONE to select available options. . Press TIME/SET to confirm and move on to the next setting. . Repeat Steps 3 and 4 to set the hour, minute, year, month, date, and temperature options. After setting the date, the clock automatically sets the day of the week. n Notes: • The Atomic Clock will override manual settings if it receives a good radio signal. • The calendar extends from 2000 to 2099. The year digits do not appear on the main display. Hold down TIME/SET until 12 Hr flashes, then press three more times to view. Press TIME/SET four times until you are at the original display. • If you do not press any key within 10 seconds, the clock returns to the current time display. Set the Alarm 1. Press ALM/SET. ALARM displays and the alarm time shows instead of the date. . Hold down ALM/SET until the hour digits flash. . Press )/WAVE or (/ZONE to set the hour. . Press ALM/SET to confirm. . Repeat Steps 3 and 4 to set the minutes. . Slide ALARM ON/OFF to ON. appears. At the set alarm time, the clock produces a series of beeps for 1 minute. Beep sequence is listed on page 10. Duration Alarm 0-9 second...