Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Wall Mount Holder — Use to mount the thermometer on a wall. Removeable Stand — Use to set thermometer on a table or other flat surface. Channel 1/2/3 — Slide to Channel 1, 2, or 3. Set to a different channel than the other remote sensors you are using. o yyyy— Appears if the batteries are weak. POOL SPA WIRELESS THERMOMETER Liquid Crystal Display — The current temperature and selected channel appear. Temperature Sensor Probe — Place it in water to test the temperature. °C / °F — Select Centigrade (°C) or Fahrenheit (°F) for your desired degree format. ±"016'"±"# Operation • Do not set two or more thermometers to the same channel when using them with one main unit. Otherwise you will unable to judge which thermometer the digits represent. • Your thermometer comes with a protective film covering the display which should be removed before use. Selecting a Location The construction of your home or office might affect the transmission range between the main unit and the thermometer. If you have a choice of several locations, try each to see which provides the best performance. R"9#40+0)"Ry Dispose of old batteries promptly and properly. Do not burn or bury them. ."%#76+10"+ • Use only fresh batteries of the required size and recommended type. • Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities. • If you do not plan to use the thermometer for a month or more, remove the batteries. Batteries can leak chemicals that can destroy electronic parts. Thank you for purchasing the RadioShack Wireless Pool/Spa Thermometer. Your thermometer measures water temperature, and is useful in swimming pools, hot tubs, and freezers. It is for use with an in/out thermometer (not supplied, available at your local RadioShack store or online at The supplied wall mount holder and stand let you mount it wherever you like. +056#..+0)"#$#66'4+'R Your thermometer requires two AA batteries (not supplied) for power. For the best performance and longest life, we recommend RadioShack alkaline batteries.o RRRRy+ .... 1. Remove the wall-mount holder from the back of the thermometer. 2. Use a Phillips screwdriver to loosen the screws on the battery compartment cover and remove the cover. ° C/° F RESET CHANNEL 1/2/3 Battery Compartment Cover 3. Slide CHANNEL 1/2/3 to the desired setting, then press RESET. The selected channel appears on the display. 4. Slide ° °°°° C/° °°°° F to the desired setting. 5. Place two batteries in the compartment as indicated by the polarity symbols (+ and –) marked inside. 6. Replace the cover and secure it with the screws. o RRRRy 12'4#6+1M Place the temperature sensor probe where you want to test. The current temperature and selected channel appear. Signals transmit to the main unit about every 30 seconds. oe ±±±±y 4'5'66+0)"6*'"5;56'L If your thermometer stops working properly, use a pointed object to press RESET. This resets the temperature and reinitializes the sensor transmitter. /1706+0F Place your thermometer on a flat surface using the supplied stand, or mount it on the wall using screws (not supplied) and the supplied holder. 5'.'%6+0)"#".1%#6+1M Choose an indoor or outdoor location for your thermometer that is within 60 – 90 feet (20 – 30 meters) of the main unit. oe ±±±±y "+/2146#06"# © 2002 RadioShack Corporation. If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon All Rights Reserved. for pertinent information. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation. o RRRRy— Warning — Important oe ±±±± — Note + ....— Caution OE °°°° — Hint 75+0)"6*'"56#0C (%%"+0(14/#6+1M 1. Remove the wall-mount holder. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 2. Set the thermometer on a flat surface. Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment 3. Insert the ends of the supplied wire generates, uses, and can radiate radio frequency energy stand into the holes on the back of the and, if not installed and used in accordance with the thermometer. + ....instructions, may cause harmful interference to radio ."%#76+10"+ communications. Do not place your thermometer: However, there is no guarantee that interference will not occur in a particular installation. If this equipment does • In direct sunlight. cause harmful interference to radio or television • In water. It is water resistant, not water-proof. reception, which can be determined by turning the equipment off and on, the user is encouraged to try to • Near electronic appliances, heating, or air correct the interference by one or more of the following conditioning vents. measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Consult your loc...