Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. 30224 HARBOR FREIGH TOOLS For technical questions and replacement parts, please call 1-800-444-3353. Manual Updated 09/05 IMPORTANT: Before using for the first time, the spray gun must be cleaned using a solvent based thinner. If not removed, the red oil used by the manufacturer for testing and corrosion protection may contaminate paint. IMPORTANT: The Spray Gun must be cleaned immediately after use. Improper cleaning is a common reason for the Spray Gun not to work. Contents Unpacking.......................................................................................................2 Specifications.................................................................................................3 Safety Warnings and Precautions.................................................................3 Air Connection................................................................................................6 Control Layout................................................................................................6 A Comparison: Conventional versus HVLP Spray Guns............................7 Preparation.....................................................................................................7 Fan Direction and Pattern Adjustment.........................................................8 Techniques....................................................................................................10 Maintenance..................................................................................................11 Parts List.......................................................................................................12 Assembly Diagram.......................................................................................13 Troubleshooting...........................................................................................14 Unpacking When unpacking, check to make sure the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. ski i 3npp4 For technical questions, please call 1-800-444-3353; REV 10/06 Troubleshooting section at end of manual. age Specifications Inlet PSI Range 30-80 PSI, 80 PSI Max. Air Consumption 11.5 CFM Paint Capacity 1 Quart Air Inlet 1/4” - 18 NPS Nozzle Size .071” Feed Type Siphon Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this tool! 1. Keep work area clean. Cluttered areas invite injuries. 2. Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lit. Do not use air tools in the presence of flammable gases or liquids. 3. Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, extension cords, or air hoses. 4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children. 5. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended. 6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair. 7. Use eye and ear protection. Always wear ANSI approved impact safety goggles. © Always wear an ANSI approved dust mask or respirator when using this Spray Gun. sku 3npp4 For technical questions, please call 1-800-444-3353; p 3 Troubleshooting section at end of manual. age 8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses. 9. Maintain tools with care. Keep tools clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords and air hoses periodically and, if damaged, have them repaired by an authorized technician. The handle ...