Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Graco Inc. Dateigröße: 680.44 kb Dateiname: Unterrichtssprache:

2-56 x .125” 2 42 170-348 GASKET, polyethylene 1 3 100-265 NUT, hex; brass; no. 10-32 2 43 170-349 TRIGGER 1 4 101-891 BRUSH, nylon; .375” (9.52 mm) dia 1 44 170-392 TOOL, extraction 1 5 101-960 NUT, hex jam; ,25”-20 1 45 170-393 HOUSING, check valve 2 6 101-970 PLUG, pipe; 1/4 npt 2 46 171-057 GASKET, copper 1 7 102-804 PACKING, о-ring; "Teflon” 2 47 171-821 SCREW, soc hd set; no. 10-32 x .19" 1 8 103-185 PACKING, о-ring; polyurethane 1 48 203-953 SCREW, trigger pivot 1 9 103-557 PACKING, о-ring; viton 1 49 205-265 MATERIAL FILTER Assy; .009" 10 103-559 PACKING, о-ring; viton 1 (.23 mm) spacing; includes items 11 103-560 RING, retaining 1 50 & 51 2 12 103-561 BOTTLE, 0.5 oz (15 cc); polyethylene 1 50 164-075 . HEAD, filter; nylon 1 13 103-610 PACKING, о-ring; viton 3 51 . ELEMENT, filter (not sold 14 103-611 PACKING, о-ring; viton 1 separately) 1 15 103-650 TOOL, drill bit; .062" (1.58 mm) dia 1 52 206-946 TRIGGER STOP Assy 16 103-651 TOOL, drill bit; no. 7 size 1 includes items 53-56 1 17 103-652 TOOL, wrench; 5/16" open end 1 53 101-965 . LOCKNUT; no. 5-40 1 18 103-917 TOOL, wrench; crescent 1 54 166-937 .BUSHING 1 19 156-766 GASKET, copper 2 55 166-938 . SPRING, compression 1 20 164-823 SPRING, compression 2 56 169-614 . STOP, trigger 1 21 165-274 NIPPLE, hex; 1/4 npt x 11/16 thd 2 57 206-994 THROAT SEAL LUBRICANT (TSL); 22 166-968 PIN, trigger pivot 1 1 pint (.47 I) 1 23 168-110 PACKING, о-ring; viton 2 58 208-645 HOUSING, valve 1 24 168-514 STEM, check valve 2 59 208-646 BALL VALVE 25 168-515 GUIDE, check valve 2 (see 306-861 for parts) 1 26 168-517 NIPPLE, hex; 1/4 npt x 11/16 thd 2 60 208-649 HOUSING, air valve 1 27 168-518 PACKING, о-ring; viton 4 61 208-650 SCREW, adjusting 1 28 170-318 BODY, gun 1 62 208-651 UNION, adapter; 1/8 npsm (f) swivel 1 29 170-321 SPOOL, valve 1 63 210-173 BALL VALVE 30 170-326 SCREW, retaining 1 (see 306-861 for parts) 1 31 170-327 CYLINDER, air 1 64 CAP, air (included in Needle and 32 170-331 NEEDLE, valve 1 Nozzle Kit: see chart below) 1 33 170-332 SOCKET, bottle 1 65 NOZZLE, mixing (included in Needle 34 170-333 PISTON 1 and Nozzle Kit: see chart below) 1 35 170-334 GASKET, polyethylene 1 66 SCREW, packing (included in Needle 36 170-337 TOOL, nozzle 1 and Nozzle Kit: see chart below) 1 37 170-338 HOUSING, nozzle 1 67 TOOL, cleaning (included in Needle 38 170-339 SCREW, hex hd; no. 10-32 x .25" and Nozzle Kit: see chart below) 1 39 170-342 RETAINER 1 68 NEEDLE (included in Needle and 40 170-343 RETAINER, valve 1 Nozzle Kit: see chart below 1 * SUGGESTED REPLACEMENT PARTS NOTE: 306 & 307 Numbers in description refer to separate instruction manuals. Order parts by number and name. Also give series letter and model number for which parts are ordered. Call or write your Graco distributor, nearest Graco factory branch or service depot for parts or service. ACCESSORIES (must be purchased separately) NEEDLE AND NOZZLE KITS For replacement or conversion of needle and nozzle. Each kit includes a matched needle, nozzle with packing nut, air cap and cleanout tool. Choose the kit best suited to the volume of material you want to spray. 208-694 REPAIR KIT Includes seals for all air passages Consists of: Ref No. Qty Ref No 9 1 27 10 1 35 11 2 41 13 3 42 14 1 46 19 2 Kit No. Flow Rate Nozzle and Needle Dia 208-689 2 lb/min (0.9 kg/min) 0.046" (1.17 mm) 208-690 8 lb/min (3.6 kg/min) 0.062" (1.57 mm) 208-691 ,15 lb/min (6.8 kg/min) 0.078" (1.98 mm) 307-089 7 ACCESSORIES (must be purchased separately) O-RING CONVERSION KITS MODEL 208-692 For use with chlorinated solvents. Consists of : 168-518 (6 included) "Viton" o-ring 102-804 (5 included) "Teflon" o-ring 103-185 (1 included) Urethane o-ring MODEL 208-693 For use with Ketone type solvents Consists of: 103-154 (6 included) Ethylene Propylene o-ring to replace 168 518 "Viton" o-ring. 102-804 (5 included) "Teflon" o-ring 103-653 (1 included) Nipple, 1/2 - 20. HOSE ADAPTER KIT MODEL 208-695 For adapting to hoses with 37° flare tubing fittings. Consists of: 208-698 (2 included) Union, 1/2-20 swivel to %-18 npsm swivel. 208-699 (1 included) Union, 9/16-18 swivel to 1/4-18 npsm swivel. 103-563 (1 included) Nipple, 1/2-20. TECHNICAL DATA Maximum Working Pressure Check Valves Material Filter Inlet Port Sizes Wetted Parts Weight 1000 psi (70 bar) poppet type; spring loaded .009 in. spacing; permanent edge-type 3/8 NPT (M), 1/4 NPT (M) optional 440 & 303 stainless steel; "Teflon"; "Viton". Urethane 3 lb (1.4 kg) SERVICE INFORMATION Listed below by the assembly changed are ADDED parts. ASSEMBLY CHANGED PART DESIGNATION REF NO. PART NO. NAME ALL FINAL Assy; Series to "B" ADDED 47 171-821 Setscrew THE GRACO WARRANTY Graco Inc. warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship under normal use and service. Scope of this warranty extends to the original purcha...

Herunterladen

Geben Sie zwei Ziffern: