Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Hitachi Dateigröße: 435.92 kb Dateiname: 86.pdf Unterrichtssprache:

Distributed exclusively by Harbor Freight Tools®. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. Copyright© 1997 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353. Page 2 SKU 00086 For technical questions, please call 1-800-444-3353. SAVE THIS MANUAL You will need this manual for the safety instructions, assembly and operating instructions and parts list. Put it in a safe, dry place for future reference. Keep your invoice with this manual. Write the invoice number on the inside front cover. SPECIFICATIONS Characteristic Value Minimum Operating Air Pressure 33 PSI Maximum Operating Air Pressure 50 PSI Cup Paint Volume 7 oz. Hose Size 3/8” Material Output 2.8 CFM @ 30 PSI - 4.0 CFM @ 50 PSI Air Inlet 1/4” NPS SAFETY WARNINGS & CAUTIONS 1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries. 2. KEEP CHILDREN AWAY. All children should be kept away from the work area. Don't let them handle tool. 3. DO NOT OPERATE THE TOUCH-UP GUN IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to operate. 4. DO NOT SPRAY NEAR OPEN FLAMES, PILOT LIGHTS IN STOVES OR HEATERS, OR ANY OTHER HEAT SOURCE. Most solvents and coatings are highly flammable, particularly when sprayed. Always make sure there is adequate ventilation. Extinguish all cigarettes when painting or cleaning. Industrial applications must follow OSHA requirements. 5. READ ALL INFORMATION CONCERNING COATING PRODUCTS AND CLEANING SOLVENTS. Chlorinated solvents, e.g. 1-1-1 Trichloroethane and Methylene Chloride (also known as methyl chloride) can chemically react with aluminum and may explode. Many paint sprayers contain aluminum. If you are in any doubt what-so-ever, contact the solvent or coating manufacturer. 6. MATERIALS USED WHEN PAINTING AND CLEANING MAY BE HARMFUL OR FATAL IF INHALED AND/OR SWALLOWED. Once again, when spraying, always make sure there is adequate ventilation. Use a mask or respirator when painting. 7. CHECK ALL SEALS BEFORE CONNECTING TO AIR SUPPLY. Make sure lid is fully attached to cup, retaining ring is screwed past the first thread, air pressure plug is tightened fully, and air supply tube is firmly attached. Never release the lid while the cup is pressurized. 8. USE EYE PROTECTION. Coatings will cause eye irritation. Wear ANSI approved chemical splash safety goggles. Goggles are available from Harbor Freight Tools. When cleaning, be especially careful as solvents can be forcibly ejected from fluid and air passages. READ ALL INSTRUCTIONS BEFORE OPERATING THE TOUCH-UP GUN REV 09d 9. DRESS SAFELY. Protective gloves and non-skid footwear or safety shoes are recommended when working with and operating the Touch-Up Gun. Don't wear loose clothing or jewelry. They can get caught in moving parts. Also, wear a protective hair covering to prevent long hair from getting caught in the Touch-Up Gun. 10. DON'T OVERREACH. Keep proper footing and balance at all times. 11. STAY ALERT. Watch what you are doing. Use common sense. Do not operate any tool when you are tired. 12. CHECK DAMAGED PARTS. Before using any tool, any part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, breakage of parts, and other conditions that may affect its operation. 13. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical replacement parts. Only use accessories intended for use with this Touch-Up Gun. Approved accessories are available from Harbor Freight Tools. 14. STORE IDLE EQUIPMENT. When not in use, Touch-Up Gun should be cleaned and stored, fully assembled, in a dry location to reduce rust. For safety, keep out of reach of children. 15. MAINTAIN TOOLS WITH CARE. Keep tools clean for better and safer performance. Follow instructions for lubricating, cleaning and changing accessories. Keep handles dry, clean and free from oil and grease. 16. OUTDOOR EXTENSION CORDS. When air compressor is used outdoors, use only rounded jacket extensions cords intended for outside use. See manufacturer’s manual for the AWG required for the compressor’s amperage draw. 17. BE AWARE OF AIR HOSES AND THEIR CONNECTIONS. Don’t trip over hoses. Make sure all connections are tight. Keep an eye out for any leaks which should be repaired immediately. 18. BE AWARE OF OTHER PEOPLE. Never spray directly at people or animals. UNPACKING The Touch-Up Gun needs minor assembly. If any parts are missing or broken, please call Harbor Freight Tools at the number on...

Herunterladen

Geben Sie zwei Ziffern: