Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
E-44 DT-X5_E_P36_48.p65 44 04.7.14, 6:04 PM If reset finds a memory problem A message like the one shown below appears on the display when the reset operation discovers a memory problem. R trigger key L trigger key When this message appears, press the R trigger key to continue with the reset operation. Note, however, that reset may not be successful depending on the condition of the memory. In this case, perform the full reset operation described on the next page. To perform a full reset Important! Performing a full reset deletes all data currently stored in the memory (RAM). If possible, backup data of the Handheld Terminal to a computer, Flash Memory, a memory card, or some other medium before performing a full reset. 1. The following message is displayed when the reset switch is pressed for about one second with a pen or similar object while pressing the power key. R trigger key L trigger key • To cancel the full reset operation, press the L trigger key instead of the R trigger key. 2. Press the R trigger key. This causes the message shown below to appear. R trigger key L trigger key • To cancel the full reset operation, press the L trigger key instead of the R trigger key. 3. Press the R trigger key again. • Full reset is performed, all data in the memory (RAM) are erased and the start-up screen is displayed. E-45 DT-X5_E_P36_48.p65 45 04.7.14, 6:04 PM DT-X5 Specifications DT-X5 Specifications 1. Handheld Terminal Model: DT-X5M10E, DT-X5M10R, DT-X5M30E, DT-X5M30R, DT-X5M30U, DT-X5M30UR CPU: 32-bit RISC type Memory: 16MB RAM (user area: Approximately 7.5MB) 64MB Flash ROM (user area: Approximately 30MB) OS: Microsoft® Windows® CE.NET operating system, English Version Display: 128 . 160 dot, monochrome FSTN LCD 2. Laser Scanner (DT-X5M10E/DT-X5M10R) Reading symbologies: EAN (JAN), UPC, Codabar (NW-7), CODE39, CODE128 (EAN128), Interleaved 2 of 5 (ITF), MSI/Pressy, IATA, CODE93, RSS (1D bar code symbology) Reading distance: Within approximately 0~400 mm (0 to 153/4") 3. C-MOS Imager (DT-X5M30E/DT-X5M30R/DT-X5M30U/DT-X5M30UR) Reading 1D Code symbologies: EAN (JAN), UPC, Codabar (NW-7), CODE39, CODE128 (EAN128), Interleaved 2 of 5 (ITF), MSI/Pressy, IATA, CODE93, RSS (1D bar code symbology) Reading distance: Within approximately 40 mm~410 mm (19/16" to 161/8") Reading stacked 2D Code symbologies: PDF 417, Micro PDF, CODE 49, Composite, Codablock, RSS (Stacked) Reading distance: Within approximately 50 mm to 250 mm (115/16" to 913/16") 4. Infrared Communication Protocol: Compatible with IrDA Ver. 1.1 (max. 30 cm) Synchronization: Asynchronous, frame synchronization Transfer rate: 4 Mbps (max.) 5. BluetoothTM Protocol: BluetoothTM Specification Ver. 1.1 Range: Approximately 5 m (varies according to radio wave conditions and local surroundings) Output: Max. 3 dBm (PowerClass 2) 6. Wireless LAN (DT-X5M10R/DT-X5M30R/DT-X5M30UR) Protocol: Complies with IEEE802.11b Radio frequency: 2.400-2.4835 GHz Data rate: Max. 11 Mbps Range: 50 m indoors, 150 m outdoors (varies according to local surroundings) Channels: 11 (US, Canada), 13 (ETSI) Other functions: Roaming among multiple Access-Points E-46 DT-X5_E_P36_48.p65 46 04.8.5, 3:50 PM 7. Power Main power supply: Two AA size alkaline batteries HA-A20BAT battery pack DT-5025LBAT large-capacity battery pack Backup power supply: Rechargeable lithium battery (built-in) Power consumption: DC 1.1A/3~5V (DT-X5M10E) DC 1.3A/3~5V (DT-X5M30E/DT-X5M30U) DC 1.4A/3.7~5V (DT-X5M10R) DC 1.6A/3.7~5V (DT-X5M30R/DT-X5M30UR) Battery life: Main battery DT-X5M10E Approx. 140 hours (AA size alkaline batteries . 2pcs)* Approx. 70 hours (HA-A20BAT)* Approx. 140 hours (DT-5025LBAT)* DT-X5M10R Approx. 70 hours (HA-A20BAT)* Approx. 140 hours (DT-5025LBAT)* Approx. 12 hours (HA-A20BAT)** Approx. 24 hours (DT-5025LBAT)** DT-X5M30E/ Approx. 30 hours (AA size alkaline batteries . 2pcs)* DT-X5M30U Approx. 30 hours (HA-A20BAT)* Approx. 60 hours (DT-5025LBAT)* DT-X5M30R/ Approx. 30 hours (HA-A20BAT)* DT-X5M30UR Approx. 60 hours (DT-5025LBAT)* Approx. 12 hours (HA-A20BAT)** Approx. 24 hours (DT-5025LBAT)** * In the case of scanning two bar codes per 10 seconds at normal temperature ** In the case of standby (6.5): Scanning (1.5): Wireless communication(2) Memory backup Data protection (RAM): 3 days (when there is no power from main battery) Clock: 4 weeks (when there is no power from main battery) 8. Operating Environment Temperature: –20 to 50°C Humidity: 10% to 80% RH (no condensation) 9. Dimensions and Weight Dimensions: DT-X5M10E/ Approx. 54 (70)* W . 179D . 21.4 (41.1)* H mm DT-X5M10R DT-X5M30E/ Approx. 54 (70)* W . 179D . 21.4 (42.8)* H mm DT-X5M30U/ DT-X5M30R/ DT-X5M30UR/ E-47 DT-X5_E_P36_48.p65 47 04.8.25, 11:55 AM DT-X5 Specifications Weight DT-X5M10E/ DT-X5M30E/ DT-X5M30U Approx. 245 g (when HA-A20BAT battery pack is installed) DT-X5M10R/ DT-X5M30R/ DT-X5M30UR 10.Drop durability: Approx. 250 g (when HA-A20BAT battery pack is installed) 1.8 m 11.Dust and water resistance: Complies with IP54 * When...