Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 1.22 mb Dateiname: Unterrichtssprache:

In case of power failure, the communication can be lost. • The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60950. Warning ••The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible. To avoid damage or malfunction Caution ••Use only the power adapter listed in the user instructions. ••Use only the batteries listed in the user instructions. ••Do not dispose of batteries in fire. ••Do not allow the charging contacts or the battery to come into contact with metal objects. ••Do not open the handset, base station or charger as you could be exposed to high voltages. ••Do not allow the product to come into contact with liquids. ••Risk of explosion if battery is replaced by an incorrect type. ••Dispose of used batteries according to the instructions. ••Always use the cables provided with the product. ••For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. ••This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls. ••Do not expose the phone to excessive heat caused by heating equipment or direct sunlight. ••Do not drop your phone or allow objects to fall on your phone. ••Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives as these may harm the set. ••Do not use the product in places where there are explosive hazards. ••Do not let small metal objects come into contact with the product. This can deteriorate audio quality and damage the product. ••Active mobile phones in the vicinity may cause interference. ••Metallic objects may be retained if placed near or on the handset receiver. About operating and storage temperatures • Operate in a place where temperature is always between 0°C to +35°C (32°F to 95°F). • Store in a place where temperature is always between -20°C and +45°C (-4° F to 113° F). • Battery life may be shortened in low temperature conditions. 3 EN 2 Your phone Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at com/welcome. What is in the box Handset** Base station Charger** Power adapter** Line cord* Guarantee .................................. Short user manual Note ••* In some countries, you have to connect the line adapter to the line cord, then plug the line cord to the telephone socket. ••** In multi-handset packs, there are additional handsets and chargers and power adapters. Overview of the phone abefcdihgjklm EN n a Earpiece b • Scroll up on the menu. • Increase the earpiece/speaker volume. • Access the phonebook. c REDIAL/C • Delete text or digits. • Cancel operation. • Access the redial list. d • End the call. • Exit the menu/operation. • Press and hold to switch the handset on or off. e • Press to enter a space during text editing. • Press and hold to lock/unlock the keypad in standby mode. f # Press and hold to enter a pause. g Mute or unmute the microphone. h Microphone i R Recall key (This function is network dependent.) j Set the dial mode (pulse mode or temporary tone mode). k • Scroll down on the menu. • Decrease the earpiece/speaker volume. • Access the call log. l Make and receive calls. m MENU/OK • Access the main menu. • Confirm selection. • Enter the options menu. • Select the function displayed on the handset screen directly above the key. n Battery door opening Overview of the base station a a • Press to find handsets. • Press and hold to enter the registration mode. EN Display icons In standby mode, the icons shown on the main screen tell you what features are available on your handset. Icon Descriptions When the handset is off the base station/charger, the bars indicate the battery level (from full to low). When the handset is on the base station/charger, the bars keep scrolling until charging is complete. The empty battery icon flashes and you hear an alert tone. The battery is low and needs recharging. It displays the connection status between the handset and base station. The more bars are shown, the better the signal strength is. It remains steadily on when browsing incoming calls in the call log. It indicates an outgoing call in the redial list. It flashes when there is a new missed call. It remains steadily on when browsing the missed calls in call log. It flashes when receiving incoming call. It remains steadily on during a call. The ringer is off. It flashes when there is a new voice message. It remains steadily on when the voice messages are already viewed in the call log. The icon is not shown when there is no voice message. / It is displayed when you scroll up/down a list/increase and decrease the volume. There are more digits on the right. Press REDIAL/C to read. EN 3 Get started ...

Herunterladen

Geben Sie zwei Ziffern: