Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
When the alarm rings • Press[Off] to turn off the alarm. • Press [Snooze](or any key except [Off] ) to snooze. »»The alarm rings again after 5 minutes. After you snooze it for 3 times, the snooze function is off. EN 14 Baby monitor Your phone supports the baby monitor function which sends an alert if the sound level exceeds the set limit. Make sure that all the handsets registered to the base station are Philips D60 models in order to have this feature functioning properly. Caution ••Make sure that you do not leave the handset that has the active monitor in the baby room. ••Make sure the baby unit and the cord are always out of reach of the baby. ••Place the baby unit at least 1 meter/3 feet but not more than 2 meters/6 feet away from the baby. Activate/Deactivate the baby unit Select [Menu] > > [Activate], then press [OK] to confirm. »»The baby unit is activated. [Baby monitor on] is displayed. Tip ••If you have not set the parent unit, a notification message is displayed. Then you are asked to select to where you send the alert: external lines or other handset number. For information, see the next section. ••To exit from the baby monitor menu, press [Off]. Note ••When the baby monitor mode is activated, the baby unit does not ring on incoming calls. Send an alert You can send an alert to other handsets within the home or an external line. External line can be a cell phone or another fixed line outside the house. Note ••Make sure that any prefix digits and/or country code are included when you send an alert. Send to other handsets 1 Select [Menu] > > [Send alert to] > [Connected line], then press [OK] to confirm. 2 Select the handset number, then press [OK] to confirm. Note ••Make sure that the distance between the baby unit and the parent unit is at least 1.5 meter away from each other to prevent the howling effect. Send to an external line 1 Select [Menu] > > [Send alert to] > [External line], then press [OK] to confirm. 2 Enter a telephone number, then press [Save] to confirm. Note ••You can still send an alert to the external line even though it is in the barred list. 1-2m 1.5m EN Send to a contact from the phonebook 1 Select [Menu] > > [Send alert to] > [Select number], then press [OK] to confirm. 2 Select a contact from the phonebook, then press [Save] to confirm. Set the baby cry level 1 Select [Menu] > > [Baby cry level], then press [OK] to confirm. 2 Select a new setting, then press [OK] to confirm. »»The setting is saved. EN 15 Services The phone supports a number of features that help you handle and manage the calls. Make sure that all the handsets registered to the base station are Philips D60 models in order to have this feature functioning properly. Auto conference To join an external call with another handset, press . Note ••This feature is available only for multi-handset versions. Activate/Deactivate auto conference 1 Select [Menu] > > [Conference], then press [OK] to confirm. 2 Select [Auto]/[Off], then press [OK] to confirm. »»The setting is saved. Call barring You can create four sets of numbers with four digits at maximum for each set of numbers. When you make a call that starts with one of these four sets of numbers, the outgoing call is then barred. Select the barring mode 1 Select [Menu] > > [Call barring] > [Barring mode] then press [OK] to confirm. 2 Enter the PIN/passcode. The default PIN/ passcode is 0000. 3 Select [On]/[Off], then press [OK] to confirm. »»The setting is saved. Add new number to the barred list 1 Select [Menu] > > [Call barring] > [Barring number], then press [OK] to confirm. 2 Enter the PIN/passcode. The default PIN is 0000. 3 Select a number from the list, then press [OK] to confirm. 4 Edit the number, then press [OK] to confirm. »»The setting is saved. Note ••The number in the barred list can still be sent as an external line for a baby call (see 'Send to an external line' on page 27). Change the PIN/passcode 1 Select [Menu] > > [Call barring] > [Change PIN], then press [OK] to confirm. 2 Enter the old PIN/passcode, then press [OK] to confirm. 3 Enter the new PIN/passcode, then press [OK] to confirm. 4 Enter the new PIN/passcode again, then press [Save] to confirm. »»The setting is saved. Note ••If you forget the PIN/passcode, you have to reset your phone (see 'Restore default settings' on page 33). EN Call list type You can set if you can see all calls or missed calls from the call log. Select the call list type 1 Select [Menu] > > [Call list type], then press [OK] to confirm. 2 Select an option, then press [OK] to confirm. Auto prefix This feature checks and formats your outgoing call number before it is dialed out. The prefix number can replace the detect number you set in the menu. For example, you set 604 as the detect number and 1250 as the prefix. When you have dialed out a number such as 6043338888, your phone changes the number to 12503338888 when it dials out. Note ••The maximum length of a detect number is 5 digits. The maximum length of an auto pr...