Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 533.63 kb Dateiname: Unterrichtssprache:

Charge each handset for 24 hours before use. Table of contents 1 Important 3 1.1 Power requirements 3 1.2 Conformity 3 1.3 Recycling and disposal 3 1.4 Using GAP standard compliance 5 1.5 Electric, Magnetic and Electromagnetic Fields (“EMF”) 5 2 Your phone 7 2.1 What’s in the box 7 2.2 Overview of the phone 8 3 Getting started 12 3.1 Connect the base station 12 3.2 Install rechargeable batteries 13 3.3 Place the handset on the charging cradle 13 3.4 Configure your phone 13 3.5 Register your handset 16 4 Using your phone 16 4.1 Make a call 16 4.4 Recall 18 4.5 How to use the intercom 18 4.6 How to find a handset 20 5 Use more of your phone 21 5.1 Call in progress 21 5.2 Phonebook 21 5.3 Call log 22 5.4 Redial list 23 5.5 Settings 23 Table of contents 6 Answering machine 28 6.1 How to turn on the answering machine 28 6.2 How to turn off the answering machine 28 6.3 How to set answer delay 28 6.4 How to record your outgoing message 28 6.5 How to play outgoing message 29 6.6 How to delete outgoing message 29 6.7 How to select the default outgoing message 29 6.8 How to play incoming messages 30 6.9 How to delete all incoming messages 31 6.10 How to screen an incoming call 31 6.11 How to remotely access your answering machine 31 6.12 How to change the remote PIN 32 7 Default settings 33 8 Frequently asked questions 34 Table of contents Impor tant Take time to read this user manual before you use your CD145. It contains important information and notes regarding your phone. 1.1 Power requirements • This product requires an electrical supply of 220-240 volts AC. In case of power failure, the communication can be lost. • The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible. Warning • Do not allow the charging contacts or the battery to come into contact with metal objects. • Do not allow the charger to come into contact with liquids. • Never use any other battery than the one delivered with the product or recommended by Philips: risk of explosion. • Always use the cables provided with the product. • Handsfree activation could suddenly increase the volume in the earpiece to a very high level: make sure the handset is not too close to your ear. • This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls. 1.2 Conformity We, Philips declare that the product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on 1.3 Recycling and disposal Disposal instructions for old products: The WEEE directive (Waste Electrical and Electronic Equipment Directive; 2000/96/EC) has been put in Impor tant place to ensure that products are recycled using best available treatment, recovery and recycling techniques to ensure human health and high environmental protection. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Inform yourself about the local separate collection system for electrical and electronic products marked by this symbol. Use one of the following disposal options: • Dispose of the complete product (including its cables, plugs and accessories) in the designated WEEE collection facilities. • If you purchase a replacement product, hand your complete old product back to the retailer. He should accept it as required by the WEEE directive. Disposal instructions for batteries: Batteries should not be disposed of with general household waste. Packaging information: Philips has marked the packaging with standard symbols designed to promote the recycling and appropriate disposal of your eventual waste. A financial contribution has been paid to the associated national recovery & recycling system. The labeled packaging material is recyclable. Impor tant 1.4 Using GAP standard compliance The GAP standard guarantees that all DECT™ GAP handsets and base stations comply with a minimum operating standard irrespective of their mark.Your CD140/145 handset and base station are GAP compliant, which means the minimum guaranteed functions are: register a handset, take the line, receive a call and dial. The advanced features may not be available if you use another handset than a CD140/145 with your base station. To register and use your CD140/145 handsets with a GAP standard base station of a different make, first follow the procedure described in the manufacturer’s instructions, then follow the procedure described in Section 3.5. To register a handset of another make to the CD140/145 base station, place the base station into registration mode (Section 3.5), then follow the procedure in the manufacturer’s instructions. 1.5 Electric, Magnetic and Electromagnetic Fields (“EMF”) 1 Philips Royal Electronics manufactures and sells many...

Herunterladen

Geben Sie zwei Ziffern: