Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
C (32 to 95. F). • Storage: Between -20 and 45. C (-4 to 113. F). Relative humidity • Operation: Up to 95% at 40°C • Storage: Up to 95% at 40°C Technical data 12 Frequently asked questions In this chapter, you will find the most frequently asked questions and answers about your phone. Connection The handset does not switch on! • Charge the batteries: Put the handset on the base station to charge. After a few moments, the phone will switch on. The handset does not charge! • Check charger connections. icon is not blinking during charge! • Battery is full: There is no need to charge the battery. • Bad battery contact: Adjust the handset slightly. • Dirty contact: Clean the batteries contact with a dry cloth. • Wrong batteries installed: Use only AAA rechargeable batteries supplied with your unit There could be risk of battery leakage if you use alkaline batteries or other battery types. Communication is lost during a call! • Charge the battery • Move closer to the base station. The phone is "Out of range"! • Move closer to the base station. Warning batt. is displayed on handset! • Use only AAA rechargeable batteries supplied with your unit. There could be risk of battery leakage if you use alkaline batteries or other battery types. Set-up Searching... is displayed on handset and icon is blinking! • Move closer to the base station. • Make sure that your base station is on. • Reset your unit and restart handset registration (see “Registration” on page 34). Sound Handset does not ring! Check that the Ring Volume is not set to Silence, and make sure icon is not displayed on the screen (see “Set the Ring Volume” on page 30). Caller cannot hear me at all! Microphone may be muted: During a call, press mUNMUTE. There’s no dialling tone! • No power: Check the connections. • Batteries are empty: Charge the batteries. • Move closer to the base station. • Wrong line cable used: Use the line cable provided. • Line adaptor is required: Connect the line adaptor to the line cord. Caller cannot hear me clearly! • Move closer to the base station. • Move the base station at least one metre away from any electronic appliances. Frequent noise interference on my radio or television! • Move the base station as far away as possible from the electrical appliances. Frequently asked questions Product behaviour Keypad does not work! • Unlock your keypad: Long press * in idle mode. The handset warms up when making a long call! • This is a normal behavior. The handset consumes energy while calling. The handset cannot be registered to the base station! • Maximum number of handsets (6) has been reached. To register a new handset, unregister an existing handset. • Remove and replace the handset batteries. • Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset. • Make sure that you have entered the correct PIN code. If you have not changed it, by default it is 0000. Caller’s number is not displayed! • Service is not activated: Check your subscription with your network operator. I cannot receive new SMS! • SMS storage space is full: Delete old SMS to receive new ones. • Wrong SMS settings: Check your SMS settings (see “SMS settings” on page 27). I cannot send or receive new SMS! • Service is not activated: Check your subscription with your network operator. • Wrong SMS settings: Check your SMS settings (see “SMS settings” on page 27). • Another SMS-enabled phone is also on your line. Deactivate the SMS reception on one of the device. • There is a compatibility problem between the operators. Contact your service provider for more information. • Identity is withheld. Show identity (see “Withhold ID” on page 39). Poor audio quality and the antenna icon is blinking! • The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the handset moves beyond the operation range, the antenna icon will blink. My handset keeps going into idle mode! • If there are no key presses for 30 seconds, the handset will automatically return to idle mode. It will also return to idle mode automatically when you place the handset back on the base station. Phonebook entry cannot be stored and Memory full is displayed! • Delete an entry to free memory before saving your contact again. The copy from my mobile phone SIM card to SE740 is not complete! • Only phonebook entries from your mobile phone SIM card will be transferred. If you have phonebook entries on your mobile phone memory, transfer them to your mobile phone SIM card before transferring to your SE740. The Master PIN code is wrong! • The default master PIN is 0000. • If it has been changed before, and you cannot remember the new one, reset the handset to revert to the default master PIN code (see “Reset Unit” on page 35). Frequently asked questions 13 Index A Accessories 5 Alarm 22 Alarm Tone 22 Answer a call 13 Answer an external call 21 Auto Answer 31 B Baby Call 33 Backlight time 32 C Call...