Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 1.14 mb Dateiname: Unterrichtssprache:

Warning The electrical network is classified as dangerous according to criteria in the standard EN 60950. The only way to power down this product is by unplugging the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible. 4.2 Connect the charger If you have bought a multi-pack product, each extra handset comes with a charger and a charger adaptor. Connect the output plug of the charger adaptor to the bottom of the charger. Connect the charger adaptor to the wall mains supply. 4.3 Insert the batteries in the handset Place the two rechargeable batteries (included) into the battery compartment. Warning Verify the batteries polarity when inserting the batteries. Incorrect polarity may damage the product. Slide the battery door firmly into place. Warning RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. USE RECOMMENDED TYPE SUPPLIED WITH THIS PRODUCT. NEVER USE NON-RECHARGEABLE BATTERIES. 4.4 Charge batteries Warning The base station must always be plugged into the mains when charging or when in use. Place handset on the base unit or the charger and let 1 2 ! 1 2 1 ! 2 ! ! the batteries continuously charge for 24 hours is reached when there is no other electrical before using. appliances working within the range area. • The battery icon appears on the screen when charging has started. Note If the batteries are completely exhausted, the product will not be able to power-on immediately. Handset may get warm during initial charge. This is normal. Note The warranty does not apply to the batteries and any other components which have a limited lifetime or are exposed to wear. 4.4.1 Low battery warning An empty battery icon indicates the batteries need recharging. Place the handset on the base unit or the charger to recharge the batteries. Note Handset will go into sleep mode after reaching a very low battery voltage level. Note A low battery alert (during off hook) will also inform you that the handset has to be recharged. If it happens during a call, the call may end shortly after the alert. 4.4.2 Battery life and range Optimal battery life is reached after 3 cycles of complete charging and discharging. Optimal range Battery life in talking mode: Up to 12 hours Battery life in standby mode: Up to 150 hours Indoor range: Up to 50 meters Outdoor range: Up to 300 meters 4.5 Standby mode Your phone is in standby mode when it is idle. The standby screen displays the handset name, handset number, battery icon, and the signal icon. 4.6 Verify the signal The signal icon displays the link status between your handset and the base unit. is steadily on: Your handset and base unit are linked. is flashing: Your handset and base unit have lost link. Getting started Using your phone 5.1 Call ! Warning This telephone is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. Press and wait for the dial tone. Dial the number you want to call. • The number appears on display and is dialed. 5.1.1 Make a call 1 2 5.1.2 Call timer The call timer shows the duration of your current call on display. It is shown in minutes and seconds (MM:SS) in the first hour. After that, it will be shown in hours and minutes (HH:MM). 5.1.3 Preparatory dialing (Pre-Dial) With pre-dial, you can see and edit the number you are calling before dialing it. 1 2 Enter the number you want to call. • The number appears on display. Press . Note You can enter up to 24 digits. Press to delete an incorrect digit. 5.1.4 Redial the last number With redialing, you can redial the last number dialed. Press 1 2 . Press . • The last dialed number appears on display and is dialed. 5.1.5 Call from phonebook memory Press while viewing a memory. • The phonebook memory appears on display and is dialed. Note If the number is longer than 12 digits, only the last 12 digits are shown on display. For more details on the phonebook memory function, see “Phonebook memory”, page 15. 5.2 Answer a call When you receive a call, the phone will ring and will flash on the display. Press to answer the call. Note If the ringer is turned off, the phone will not ring for the incoming call. 5.2.1 Answer a call in handsfree mode The handsfree feature enables you to talk to the caller without holding onto the phone. It also allows others in the room to join in the conversation. When you receive a call, the phone will ring and will flash on the display. Press to answer the call. 5.3 Loudspeaker phone During a call, press to turn on and off the loudspeaker. • appears on the handset display when loudspeaker is on. 5.4 Adjust the audio volume During a call, 1 2 press to increase the audio volume, press to decrease the audio volume. 5.5 End a call Press during a call to end it. Using your phone Press during a call. • R appears and you will hear a dial tone. Enter the number you want to call. After the second call is answered, y...

Herunterladen

Geben Sie zwei Ziffern: