Stimmen - 4, Durchschnittliche Bewertung: 4.8
(
)
)
|
Anleitung Zusammenfassung
Press the LNR/P button [6] and the last dialed number will be automatically redialed. (You can redial a number consisting of no more than 32 digits.) Microphone mute You can turn off the handset microphone during a call. The calling party will not hear you. 1. Press the SEC button [4]. (When the microphone is turned off, the indicator light [2] flashes and the handset buttons are locked.) 2. To cancel the microphone mute, press the SEC button [4] once again. Inserting a pause in the dialed number When saving a phone number in the phone memory, press the LNR/P button [6] where the pause is needed (if a long pause is necessary, then press the LNR/P button [6] several times). For example, if you are dialing through a PBX and should dial '9' to access the PBX trunk, press the LNR/P button [6] after entering '9' and then enter the number you want to store. Storing a number in the phone memory You can store in the phone memory, 16 phone numbers up to 20 digits each. 1. Press the MEM button [8], the indicator light [2] starts to flash. 2. Enter the number you want to store in the memory. 3. Press the MEM button [8] once again. 4. Enter a two-digit number (01 to 16) under which you want to store the entered phone number. 5. After completing the above steps you will hear a beep and the indicator light [2] will go out. Dialing a number stored in the phone memory 1. Press the PHONE button [3], the indicator light [2] lights up. 2. Press the MEM button [8]. 3. Enter the two-digit number (01 to 16) corresponding to the phone number you want to dial Note: You can store in the phone number just a part of a phone number (for example, the international telephone code) and combine memory dialing with normal phone number dialing. Deleting a number stored in the phone memory 1. Press the MEM button [8], the indicator light [2] starts to flash. 2. Press the MEM button [8] once again. 3. Enter the two-digit number (01 to 16) corresponding to the phone number you want to delete. 4. After completing the above steps you will hear a beep and the indicator light [2] will go out. Changing the ringer tone 1. Press the VOLUME/RINGER button [7](the ringer tone cannot be changed during a call), the indicator light [2] lights up. 2. To select the desired ringer tone, press one of the buttons 1...8 . 3. Press the VOLUME/RINGER 4/a ^ button [7] once again, the indicator light [2] goes out. 9 'ButaioHe. ENGLISH Changing the ringer volume 1. Press the VOLUME/RINGER ■Dieses Handbuch ist für folgende Modelle:
Schnurlostelefone - Active Twin XA2020 (1.03 mb)