Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
This handset is an accessory handset for use with Panasonic base units KX-TH111/KX-TH112. You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset. Please read the base unit’s operating instructions for further details. Charge the battery for 6 hours before initial use. Please read this Installation Manual before using the unit and save for future reference. For assistance, visit our website: for customers in the U.S.A. or Puerto Rico. PQQX15314ZB DM0506MK1076 Accessory information Included accessories Accessory item Order number Quantity Charger PQLV30048ZS 1 AC adaptor for charger PQLV206X 1 Battery HHR-P104 1 Handset cover*1 PQYNTHA19R 1 *1 The handset cover comes attached to the handset. Additional/replacement accessories Accessory item Order number Rechargeable nickel metal hydride (Ni-MH) battery HHR-P104 Corded headset KX-TCA86, KX-TCA88HA, KX-TCA91, KX-TCA92, KX-TCA93, KX-TCA94, or KX-TCA95 Belt clip PQKE10404Z1 Sales and support information L To order additional/replacement accessories, call 1-800-332-5368. L TTY users (hearing or speech impaired users) can call 1-866-605-1277. For assistance, please visit Setting up the handset Connecting the charger L Use only the included Panasonic AC adaptor PQLV206. (120 V AC, 60 Hz) Bottom of the charger Hooks Fasten the AC adaptor cord to prevent it from being disconnected. Note: L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. Battery installation 1 Press the notch of the handset cover firmly, and slide it in the direction of the arrow. 2 Insert the battery (A), and press it down until it snaps into position (B). Then close the handset cover (C, D). ABCD Attention: A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY (1-800822- 8837) for information on how to recycle this battery. For assistance, please visit Battery charge Place the handset on the charger for 6 hours before initial use. While charging, the charge indicator on the handset lights in amber. When the battery is fully charged, the indicator lights in green. Charge indicator Note: L If you want to use the handset immediately, charge the battery for at least 15 minutes. L To ensure that the battery charges properly, clean the charge contacts of the handset and charger with a soft, dry cloth once a month. Clean more often if the unit is subject to the exposure of grease, dust, or high humidity. Panasonic battery performance Operation Operating time While in use Up to 4.5 hours (talking) While not in use Up to 7 days (standby) While using the Up to 3.5 hours clarity booster feature Note: L The handset can be left on the charger without any ill effect on the battery. L The battery level may not be displayed correctly after you replace the battery. In this case, place the handset on the charger and let charge for 6 hours. For assistance, please visit Registration Register the handset to a KX-TH111/KXTH112 base unit. 1 Base unit: Press and hold {INTERCOM} until the IN USE indicator flashes. L After the IN USE indicator starts flashing, the rest of the procedure must be completed within 2 minutes. 2 Handset: Press {OK}, then wait until a beep sounds. Changing the display language 1 {MENU} (center of joystick) i {#}{1}{1}{0} 2 Select the desired setting. 3 Press the center of joystick to save. i {OFF} For assistance, please visit Headset (optional) Connecting the corded headset Connecting a headset to the handset allows hands-free phone conversations. We recommend using the Panasonic headset noted on page 2. L Headset shown is KX-TCA86. Switching a call between the headset and handset speakerphone To switch to the handset speakerphone, press {s}. To return to the headset, press {C}. Wall mounting 1 Drive the screws (not included) into the wall using the wall mount template as a guide. 25.2 mm (120 V AC, 60 Hz) Screws (1 inch) 2 Mount the charger (A), then slide it down (B) and to the right (C) until it is secure. ABC Wall mount template for the charger 25.2 mm (1 inch) For assistance, please visit Specifications General Operating environment: 5 °C – 40°C (41 °F – 104 °F) Handset Frequency: 2.402 GHz – 2.48 GHz Bluetooth® compliance Bluetooth wireless technology 1.2 Dimensions: Approx. height 160 mm x width 49 mm x depth 33 mm (65/16 inches x 115/16 inches x 15/16 inches) Mass (Weight): Approx. 169 g (0.37 lb.) Power output: 125 mW (max.) Power supply...