Stimmen - 5, Durchschnittliche Bewertung: 3.4
(
)
)
|
Anleitung Zusammenfassung
KX-TGA400B is the optional cordless handset for the KX-TG4000B. These operating instructions cover most of the features of this cordless handset. Please read the KX-TG4000B operating instructions for further details. Accessories (included) For extra orders, call 1-800-332-5368. Charger .................one AC Adaptor............one Order No. KX-TCA1-G Belt Clip.................one Order No. PQKE10101Z1 Contents Installation ................................... 1 Location of Controls..................... 2 Registering Cordless Handsets... 3 Making Calls................................ 3 Answering Calls........................... 4 Intercom....................................... 4 Transferring a Call....................... 4 Storing Names and Numbers in the Directory ............................ 5 Dialing from the Directory............ 6 Erasing an Item in the Directory .. 6 Caller ID Service.......................... 6 Viewing the Caller List................. 7 Calling Back from the Caller List .. 7 Voice Mail System....................... 7 Automated Attendant System...... 8 Listening to Messages................. 9 Delivering Your Own Message....10 Remote Operation from a Touch Tone Phone.................................10 Wall Mounting..............................11 Using an Optional Headset..........11 Canceling Handset Registration..11 Using the Belt Clip.......................12 Battery Replacement...................12 Power Outlet (AC 120 V, 60 Hz) AC Adaptor Fasten the AC adaptor cord to prevent it from being disconnected. Bottom of the charger Installation Connecting the AC adaptor to the charger • USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX-TCA1-G). • The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) Printed in Japan PQQX12631ZA SS0700NA1090 – 1– Charging the battery Place the cordless handset on the charger and charge for about 8 hours before initial use. Make sure the handset faces forward as shown. • The CHARGE indicator lights. • If you charge the discharged battery, it will be charged quickly. In that case the handset may feel warm. This is normal. CHARGE • Recharge the battery when: Indicator –“Recharge” is displayed, –“ ” flashes on the display, or – the handset beeps intermittently while it is in use. Handset battery information After your Panasonic battery is fully charged: The battery is beneath this cover. Operation Approx. battery life While in use (TALK) Up to about 8 hours While not in use (Standby) Up to about 4 days • Clean the charge contacts of the handset and the charger with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly. Location of Controls Display LINE Buttons (TALK) (CLEAR) ( , , I, H) Headset Jack Charge Contacts (FUNCTION/EXIT) (ENTER)/ (Voice Mail) (REDIAL/EDIT) CHARGE Indicator Charge Contacts (INTERCOM/HOLD/TRANSFER) Navigator Key – 2– Registering Cordless Handsets Registration is necessary for cordless handsets. A handset will be assigned the number at registration. The handset number is used as the extension number (p. 4, 8). You can register up to 8 cordless handsets at the KX-TG4000B base unit. Make sure that the base unit and cordless handset are in the standby mode. Registration must be completed within 1 minute. 1 Base unit: 7 Base unit/Cordless handset: Press (FUNCTION). Wait until a beep sounds and until both of the displays show the 2 Select “Registration” by assigned handset number. pressing or , and press H. Press (EXIT). 3 Select “HS registration” by pressing , and press H. • The handset number ([1]–[8]) is displayed in the standby mode. or 4 Cordless handset: Press (FUNCTION). If a PIN (Personal Identification 5 Select “Registration” by Number) has been stored: pressing or , and press H. Follow steps 1 to 6, and enter the PIN. Press (ENTER). 6 Press H to select “HS registration”. Making Calls Four calls can be handled simultaneously on separate telephone lines by the base unit and 3 cordless handsets (or by 4 cordless handsets). 1 Press (TALK). • You can press a line button instead of pressing (TALK). 2 Dial a phone number. 3 To hang up, press (TALK) or place the handset on the charger. • To adjust the receiver volume, press or while talking. To dial after confirming the entered number: Enter a phone number, and press (TALK). • To redial a number from the redial list (contains the last 10 numbers dialed), press (REDIAL) until the desired number is displayed, and press (TALK). – 3– Answering Calls Four calls can be handled simultaneously by the base unit and 3 cordless handsets (or by 4 cordless handsets). Press (TALK). • You can press the called line button instead of pressing (TALK). • You can also answer a call by pressing any dialing button (0) to (9), (*) or (#). OR If the handset is on the charger, just lift up. , , , What “ ” on the display mean: Off (invisible): The line is free...