Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Press the battery down until it places into the compartment ($). Close the cover. Installation! Connecting the Charger unit •USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX-TCA1-G). •The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) Installation Manual PLEASE READ BEFORE USE AND SAVE. KX-TGA271W/KX-TGA271V is the optional cordless handset for the KX-TG2700/KX-TG2720/KX-TG2730/KX-TG2740. This installation manual only describes the steps necessary to start up the handset. Please read the KX-TG2700/KX-TG2720/KX-TG2730/KX-TG2740 operating instructions for further details. 2.4GHz Expandable Cordless Handset Model No. KX-TGA271W/KX-TGA271V Charger Unit ...................................one Charger Order No. PQLV30014ZW AC Adaptor Order No. KX-TCA1-G (KX-TCA1) Handset Cover................................one Order No. PQKK10130Z1 (White) Order No. PQKK10130Z2 (Violet) Battery ...............................one Order No. N4HHGMB00001 (HHR-P103) Belt Clip .............................one Order No. PQKE10349Z1 Accessories (included) For extra orders, call 1-800-332-5368. 2 1 AC Adaptor Power Outlet (AC 120 V, 60 Hz) – 2 – • Clean the charge contacts of the handset and the charger with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly. Handset battery information After your Panasonic battery is fully charged: Charging the battery Place the handset on the charger and charge for about 15 hours before initial use. • The CHARGE indicator lights, a beep sounds and “Charging” will be displayed. • Recharge the battery when: – “Recharge battery” is displayed, – “ ” flashes on the display, or – the handset beeps intermittently while it is in use. • If the battery has been discharged, the handset will display “Charge for 15HRS” and “ ” when you place the handset on the charger. The handset will not work. Keep charging. Belt Clip! You can hang the handset on your belt or pocket using the belt clip. To attach the belt clip To remove the belt clip While pressing the top of the clip (A), pull the right edge in the direction of the arrow (B). CHARGE Indicator Charge Contacts Operation Operating time While in use (TALK) While not in use (Standby) While using the Reception Booster feature Up to 3.5 hours Up to 7 days Up to 2.7 hours When using the 2-Way Radio mode with the battery fully charged: Operation Operating time While in use (TALK) While not in use (Standby) Up to 3.5 hours Up to 9 hours A B – 3 – The handset display shows the instructions as shown on the right. 1 Base unit: Press (MUTE). •The MUTE indicator light flashes. 2 Handset: #Press the right soft key ( ). $Wait until a long beep sounds and the display shows the registered number. The registration will be then complete. •The registered number “[1]” to “[8]” is shown on the top right of the display. •You can stop registration by pressing (OFF) on the handset and pressing (MUTE) on the base unit. OK SP PRIVACY [-] Press MUTE on base unit, then OK on handset to register handset OK Ex. Extension number 2 SP PRIVACY [-] Handset Registering SP PRIVACY [2] Handset [2] Registered Registration! This cordless handset must be registered at the KX-TG2700/KX-TG2720/ KX-TG2730/KX-TG2740 base unit. The handset will be assigned the extension number at registration. Only one handset can be registered at a time. Make sure the base unit and the other handsets are not being used. Registration must be completed within 1 minute. O K [-] Press MUTE on base unit, then OK on handset to register handset Soft key ( OK ) •The illustration of the base unit is the KX-TG2730. To cancel the handset registration, please see the KX-TG2700/KX-TG2720/ KX-TG2730/KX-TG2740 Operating Instructions. For assistance, please call: 1-800-211-PANA(7262) (MUTE) Button and Indicator – 4 – Optional Headset! Plugging an optional headset into the handset allows a hands-free phone conversation. Please use only the Panasonic KX-TCA88 headset. To order, call the accessories telephone number on page 1. Connecting the headset Open the headset jack cover, and connect the headset to the headset jack as shown. H Headset Jack Wall Mounting! The charger can be wall mounted. Connect the AC adaptor. Install screws using the wall template below. Mount the charger (#). Slide it down ($) then slide down to the right (%) until it is secured. $ # % Wall Template 6.15 cm (2 13.32") Screws 6.15 cm (2 13.32") To Power Outlet For assistance, please call: 1-800-211-PANA(7262) – 5 – FCC and Other Information! When programming emergency numbers and/or making test calls to emergency numbers: 1. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up. 2. Perform such activities in the off-peak hours, such as early morning hours or late evenings. This device complies with Part 15 of the FCC Rules. Operation is subject to the following tw...