Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
•If you do not need to change the name, go to step 5. Edit the name using the dialing buttons, BACK © or FWD/EDIT © (p. 47), up to 15 characters. Press ® {Next key). •If you do not need to change the number, go to step 7. Add a number to the current number. 8 •Pressing ¡INTERCOM/HOLD/CLEARl erases the digit to the left of the cursor. To erase all digits, press and hold I INTERCOMVHOLD/CLEARl. Press ® (Next key). •If you want to change the storing name or number, press © (Edit key) repeatedly to reach the desired display and change it. Press FWD/EDIT © (Save key). •A beep sounds. •To continue editing other items, repeat from step 3. •To return to the standby mode, press IFUNCTION/EXIT/CH I. Directory list ▼ A ►=Caller s list Jane 1234567 Enter name iJ;ane 4* Y=Next Enter name Jane Walker* Y=Next ■Ü2 34567 4* Y=Next 098\L>234567 ^ T=Next Jane Walker 0981234567 A=Edit ►=Save Jane Walker 0981234567 »You can exit the programming mode any time by pressing [ FUNCTION/EXIT/CHl. 52 Erasing an Item from the Directory Make sure the unit is in the standby mode initially With the handset With the base unit 1 2 3 Press BACK 0 or FWD/EDIT 0 to enter the directory list 1 Press 0 or 0 to enter the directory list Directory list Directory list VA VA ►=Caller's list ►=Caller's list Press ©or (a) •The first item is displayed Press (v) or [a] repeatedly to find the directory item you want to erase •To search for the item by initial, see page 49 2 3 Press [v) or 0 •The first item is displayed Press 0 or 0 repeatedly to find the directory item you want to erase •To search for the item by initial, see page 50 Helen Helen 1234567890 1234567890 4 Press i INTER CO M/H OLD/CLEARl •To stop erasing, press BACK @ (No key) 4 Press I ERASE/CLEAR I •To stop erasing, press 0 (No key) Clear? <=No ► =Yes Press FW D/EDIT 0 (Yes key) or UNTERCOM/HOLD/CLEARl Press © (Yes key) or I ERASE/CLEAR I Clear Clear •A beep sounds and the item is erased •To erase other items, repeat from step 3 •To return to the standby mode, press IFUNCTION/EXIT/CHI •A beep sounds and the item is erased •To erase other items, repeat from step 3 •To return to the standby mode, press I STOP/EXIT I Clear-5 <=No ►=Yes 53 Using the Other Line During a Conversation While Someone Else is Using a Line (Simultaneous Base/Handset Calling) The handset and base unit can be used at the same time on separate telephone lines. To make a call with the handset 1 Ex: If the base unit is using LINE 1 Press the other line button (LINE 2) on the handset or (TALK). • IB” is displayed. Dial a telephone number. 3To hang up, press ITALKI or place the handset on the base unit. To answer a call with the handset 1 Ex: If the base unit is using LINE 1 Press the other line button (LINE 2) on the handset or ITALKI. To hang up, press ITALKI or place the handset on the base unit. To make a call with the base unit 1 Ex: If the handset is using LINE 1 Press the other line button (LINE 2) on the base unit or I DIGITAL SP-PHQ~NE|. •The DIGITAL SP-PHONE indicator and the LINE 2 button light. Dial a telephone number. 3To hang up, press [DIGITAL SP-PHONEl. To answer a call with the base unit 1 Ex: If the handset is using LINE 1 Press the other line button (LINE 2) on the base unit or I DIGITAL SP-PHQNEl. To hang up, press [DIGITAL SP-PHOWI. •If another phone is connected on either line, you can also use it while the handset or base unit is using the other line. •If the line selection is not set to “Auto" (p. 62), press the line button in step 1. 54 While You are Using a Line During a conversation, if two tones sound, and the other line status icon on the handset and the other line button on the base unit flash quickly, an incoming call is being received on that line You can answer the second call while holding the first call You can also make a call without terminating the first call If you subscribe to a Caller ID service, the second caller’s information will be displayed when a call is being received on the other line (p 34) You can delete the two tones (incoming call tone) by programming See page 63 With the handset IEx: If you are using LINE 1 Press I INTERCOM/HOLD/CLEAR 1 to put the first call (LINE 1) on hold •“ESS” flashes on the display 2 Press the other line button (LINE 2) to make or answer a second call •u[23” is displayed 3To return to the first call (LINE 1), press the line button for the first call (LINE 1) •The second call is terminated With the base unit •4 Ex: If you are using LINE 1 I Press I HOLD/LOCATOR/INTERCOM I to put the first call (LINE 1) on hold •The LINE 1 button flashes 2 Press the other line button (LINE 2) to make or answer a second call •The LINE 2 button lights 3To return to the first call (LINE 1), press the line button for the first call (LINE 1) •The second call is terminated • To hold the second call in step 3, press IINTERCOM/HOLD/CLEARl or ...