Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Preparation For assistance, please call: 1-800-211-PANA(7262) 13 Programmable Functions Talking Caller ID Handset After subscribing to a Caller ID service, the handset will display a caller’s name and phone number (p. 23). Name and telephone number Caller ID service is required. This Talking Caller ID feature allows the unit to announce a displayed caller’s name through the handset and base unit speakers while a call is being received (p. 23). For example, when you receive a call from “SMITH, JOHN”, the unit will display “SMITH,JOHN” and announce “Call from SMITH, JOHN” repeatedly until you answer the call. The factory preset is ON. > > 1 Press [MENU]. 2 Scroll to “Talk Caller ID” by pressing [] or [], then press Select. > 3 Select “Off” or “On” by pressing [] or []. > Talk Caller ID Exit Select>> Talk Caller ID :On Back Save>> 4 Press Save, then press [OFF]. Auto Talk Handset The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without pressing [] or [ ]. To use this feature, turn the feature ON. The factory preset is OFF. > > 1 Press [MENU]. 2 Scroll to “Initial setting” by pressing [] or [], then press Select. Initial settingExit Select>> 3 Scroll to “Auto talk” by pressing [] or [], then press Select. >> 4 Select “On” or “Off” by pressing [] or [].>> Auto talk Back Select>> Auto talk :Off Back Save>> 5 Press Save, then press [OFF]. • In order to view Caller ID information after you lift up the handset to answer a call, leave the Auto Talk feature OFF. Programmable Functions LCD Contrast Handset You can select the handset LCD contrast (5 levels). The factory preset is level 3. 1 Press [MENU]. Preparation2 Scroll to “Initial setting” by pressing [] or [], then press Select. 4 Select the desired contrast by pressing [] or []. • Each time you press [] or [], the LCD contrast > >Initial settingExit Select>> LCD contrast Back Select>> > > >> LCD contrast Low HighBack Save>> 3 Press Select at “LCD contrast”. will change. 5 Press Save, then press [OFF]. For assistance, please call: 1-800-211-PANA(7262) 15 Programmable Functions Ringer Volume You can select the handset or base unit ringer volume HIGH, MEDIUM, LOW or OFF. The factory preset is HIGH. If set to OFF, the handset or base unit will not ring and a caller’s name will not be announced even if the Talking Caller ID feature is ON (p. 14). Handset 1 Press [MENU]. 2 Press Select at “Ringer setting”. 3 Press Select at “Ringer volume”. 4 Select the desired volume level by pressing [] or []. • To turn the ringer OFF, press [] repeatedly Ringer setting Exit Select>> Ringer volumeBack Select>> >> > Ringer volumeLow HighBack Save>> Ex. HIGH • The volume will change and ring. • The number of steps indicates the volume level. until “Ringer off” is displayed. 5 Press Save, then press [OFF]. • If set to OFF, the handset displays “Ringer off” while not in use. But if there are missed calls and the handset is off the base unit, the handset will not display “Ringer off”. • You can select the ringer volume while an external call is being received. Press > > > [] or [] while the handset is just ringing. To set to OFF, press and hold [] until “Ringer off” is displayed. Base Unit > > > > Make sure the base unit is not being used. To select HIGH (preset), MEDIUM or LOW, press VOLUME [] or []. • To increase volume, press VOLUME []. To decrease volume, press VOLUME []. To turn the ringer OFF, press and hold VOLUME [ > ] until 2 beeps sound. > > > > > To turn the ringer ON, press VOLUME [] or []. • The ringer will sound at the LOW level. • You can select the ringer volume while an external call is being received. Press VOLUME [] or [] while the base unit is just ringing. To set to OFF, press and hold VOLUME [] for more than 2 seconds. Programmable Functions Ringer Tone Handset You can select one of 6 ringer tones for external calls on the handset and the base unit. The factory preset is 1. Preparation 3 Scroll to “Ringer tone” by pressing [] or [], then press Select. 4 Select the desired tone by pressing [] or []. Ringer setting Exit Select>> > >Ringer toneBack Select>> >>Ringer tone :1 Back Save>> 1 Press [MENU]. 2 Press Select at “Ringer setting”. • If the handset ringer volume has been set to OFF, the unit will not ring (p. 16). • You can also select a ringer tone by pressing dialing buttons [1] to [6]. 5 Press Save, then press [OFF]. Line Mode Handset The line mode is preset at the factory to “B”. Generally leave the line mode “B”. If a change of the line mode setting is required by our customer call center or service person, change the line mode to “A”. 1 Press [MENU]. 2 Scroll to “Initial setting” by pressing [] or [], then press Select. 3 Scroll to “Set tel line” by pressing [] or [], then press Select. 4 Scroll to “Set line mode” by pressing [] or [], then press Select. 5 Select “A” or “B” by pressing [] or []. > >Initial settingExit Select>> > >Set tel line Back Select>> > >Set line mode Back Select>> >>Set line mode :B Back Save>> ...