Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
If you select pager mode “2" (p. 64) and a caller does not leave a message, “00” will be displayed instead of “11”. Ex. When the caller whose number is “2345678” alerts your pager directly: “2345678” will be displayed on your pager. 6 Pager Call To erase the stored pager number Press (PROGRAM) => (PLAYBACK) * (#) * (PROGRAM] oThe pager call mode will automatically return to OFF (p. 65). To erase the stored home telephone number Press (PROGRAM) => [PLAYBACK) ® [PROGRAM). Pager Mode Setting After subscribing to a Caller ID service (p. 37), you can select one of the following pager mode settings. The unit will alert your pager: 1. After the unit records an incoming message (factory preset), OR 2. Each time the unit receives a Caller ID call, even if the caller does not leave a message. If you want to change the mode, proceed as follows. 1 Press (PROGRAM). ©The TALK indicator flashes. 2 Press (PLAYBACK). o“p” is displayed on the base unit. 3 Press ©. oThe current setting is displayed on the base unit. 4 To select “2”, press (2). OR To select “1”, press (T). oThe entered number is displayed on the base unit. 5 Press (PROGRAM). °A beep sounds. oTo cancel during programming, press (PROGRAM). Start again from step 1. o|f you select “2” and set the unit to call your pager (p. 65), the unit will alert your pager even if the answering system is not turned on. oEven if you select “2", the unit will not alert your pager when a Caller ID call which does not have a phone number is received. Setting the Unit to Call a Pager 1 Press (PLAYBACK). oThe number of new messages on the line(s) you set to record is heard on the handset. Press (3). 0“ E2233”is displayed on the base unit. not displayed, the pager number has not been stored. Store the number (p. 61, 62), and try again. Press (PLAYBACKI To turn off the pager call mode, repeat steps 1 through 3. o“ii%&mn will disappear. oEach time you press (3} in step 2, the mode will turn on or off. (playback! If you have not subscribed to a Caller ID service, the caller’s telephone number will not be displayed on your pager. oif another message {or Caller ID call) is received before the unit alerts your pager for a previous message (or Caller ID call), the previous caller information will not be sent to your pager. Only the last call received will be sent to your pager. o if someone else makes or answers another call with the unit or a parallel connected phone before the unit alerts your pager for a previous message (or Caller ID call), the unit will stop alerting your pager for that message (or Caller ID call). o If you receive a telephone number on your pager but cannot recognize the caller, you may have received a direct inward dial {DID) call, such as from a PBX. Please call your unit to check the caller’s message. demote Operation from a Touch Tone Phone You can operate the answering system from any touch tone phone. A synthesized voice menu will guide you on how to operate the unit (p. 68). ©To skip the voice menu and operate the unit directly, see page 70. Summary of remote operation Call your unit from a touch tone phone. Enter your remote code (p. 67) during or after the greeting message. oThe unit announces the line(s) for which the answering system is on and the number of new messages on the line(s). •The unit will announce the remaining recording time after playback, if it is less than 5 minutes. 66 o Setting the Remote Code The remote code prevents unauthorized people from accessing your unit and listening to your messages. Choose any 2-digit number (00-99). The factory preset remote code is “11”. If you do not program your own remote code, you can use "11 ”. The TALK indicator light must be off and the base unit must be in the stand-by mode before programming. Use the handset near the base unit. ■4 Press [PROGRAM). P I ©The TALK indicator flashes. 2 Press (PLAYBACK). o“p” is displayed on the base unit. 3 Press ©. oThe current remote code is displayed on the base unit. 4 Enter a remote code using a 2-digit number (00-99). oThe entered number is displayed on the base unit. 5 Press [PROGRAM). oA beep sounds. oTo cancel during programming, press [PROGRAM). Start again from step t. olf 6 beeps sound during programming, a wrong key was pressed. Enter the correct number To check the remote code Press (PROGRAM) =» [PLAYBACK) (T). ©The current remote code is displayed on the base unit. When finished, press [PROGRAM). TALK Indicator (PROGRAM) [ PLAYBACK) $> Remote Operation from a Touch Tone Phone Voice Menu You can operate the answering system only for the line(s) you set to record by following the voice menu. The shaded boxes are voice prompts. S N Press 1 to play back all messages. Press (T). ---- N All message Press 2 for other functions. playback. Press Press 1 to play back new messages. Press 2 for other functions. V J Press (!]• New message playback. ^ J ^ Press ©. r A Press 1 to record you...