Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
You can select the following flash times: “90,100, 110, 250, 300, 400, 600, 700 msec (milliseconds)”, using the handset near the base unit. Your phone comes from the factory set to “700 msec". The TALK indicator light must be off before programming. Press [PROGRAM] [FLASH], Dialing button {(T) to (IT)) + (AUTO) (Ï): 90 msec (2) (4): 250 msec (5) ®: 600 msec ® 100 msec (3J: 110 msec 300 msec (6): 400 msec 700 msec • If 3 beeps sound after programming, a wrong key was pressed. Start again from the beginning. • If you are connected via a PBX, a longer flash time may be necessary to use PBX functions (transferring a call etc.). Consult your PBX installer for the correct setting. 5-B For Call Waiting Service Users Press [FLASH] if you hear a call-waiting tone while talking. •The first call is put on hold and you can answer the second call. •To return to the first caller, press (FLASH) again. •If this function does not operate properly, the flash time may not be set correctly. Consult your telephone company for details. See section 5-A for how to adjust the flash time. 5-C Automatic Security Code Setting Whenever you place the handset on the base unit, the unit automatically selects one of more than a million security codes. These codes help prevent the unauthorized use of your telephone line by another cordless telephone user. 5-D Temporary Tone Dialing (For Rotary or Pulse Service Users) Press (TONE) before entering access numbers which require tone dialing. •The dialing mode changes to tone. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the mode will return to pulse. •Access numbers entered after pressing [TONE] will not be included when redialing. 41 One-Touch Dialer 4-A Storing a Phone Number in the DIRECT Button [DIRECT [TALK land Indicator [PAUSE (PROGRAM) A phone number stored in the [DIRECT) button can be dialed with a one-touch operation. The TALK indicator light must be off before programming. 1. Press (PROGRAM). •The TALK indicator flashes. 2. Enter a phone number up to 22 digits. • If you misdial, press [PROGRAM], and start again from step 1. 3. Press [DIRECT). •A beep sounds. •If a pause is required for dialing, press [ PAUSE) where needed. Pressing (PAUSE) counts as one digit (5-E). I 4-B Dialing the Stored Number in the DIRECT Button Press [TALK] +> (DIRECT). • If your line has rotary or pulse service, any access numbers stored after pressing [TONE] will not be dialed. To erase a stored number: press (PROGRAM) + (DIRECT). Special Features Section 5 5-E How to Use the PAUSE Button (For Analog PBX Line/Long Distance Service Users) We recommend you press (PAUSE) if a pause is required for dialing with a PBX or to access a long distance service. Ex: Line access number (9) (PBX) • Pressing (PAUSE) once creates a 3.5 second pause. This prevents misdialing when you redial or dial a stored number. •Pressing (PAUSE) more than once increases the length of the pause between numbers. 5-F Handset Locator __ You can locate the handset or page the handset user with beep tones. 1 Press [HANDSET LOCATOR] on the base unit. •The IN USE/CHARGE indicator flashes and the handset beeps for 1 minute. 2 To stop paging, press (HANDSET LOCATOR) again or press [TALK] twice on the handset. Things You Should Know 6-A Battery 6-B Battery Replacement Recharge When the RECHARGE indicator flashes or the unit beeps intermittently, place the handset on the base unit to recharge the battery for 4 hours. RECHARGE • If you DO NOT recharge the handset Indicator- battery for more than 15 minutes, the RECHARGE indicator will continue to flash. Battery information After your Panasonic battery is fully charged: o.O_Q Operation Approx. battery life While in use (TALK) near the base unit* Up to about 6 hours away from the base unit ■ Up to about 4 hours While not in use (Stand-by) Up to about 7 days If the RECHARGE indicator flashes after being fully charged, replace the battery with a new Panasonic P-P501 (KX-A36) battery. To order, call the accessories telephone number in section 1-A. 1 2 3 Remove the cover by sliding while pressing the arrow. Replace the battery, and close the cover. Be sure to charge the new battery for 4 hours. ‘Within about 10 feet (3 m) • Battery life may vary depending on usage conditions and ambient temperature. . •Clean the handset and the base unit charge contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly. • If the battery is fully charged, you do not have to place the handset on the base unit until the RECHARGE indicator flashes. This will maximize the battery life. •The battery cannot be overcharged. Attention: The product you have purchased is powered by a nickel cadmium battery which is recyclable. At the end of its useful life, under various state and local la...