Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
To switch to the speakerphone, press [REMOTE SPl on the handset (p. 36). Hands-free Digital Duplex Speakerphone For best performance, please note the following: © Talk alternately with the caller in a quiet room. © If the other party has difficulty hearing you, press VOLUME 0 to decrease the speaker volume, o If the other party’s voice from the speaker cuts in/out during a conversation, press VOLUME 0 to decrease the speaker volume. 32 To adjust the speaker volume (8 levels) while talking To increase, press VOLUME 0. To decrease, press VOLUME 0. To redial the last number dialed on the base unit Press [DIGITAL SP-PHQNEl e> I REDIAL/PAUSE] To put a call on hold Press 1 HOLD/RINGER 1. « The DIGITAL SP-PHONE indicator flashes. To release the hold From the base unit, press I DIGITAL SP-PHQNEl. From the handset, press ITALK] or lift the handset off the base unit. © You can also press [REMOTE SPl on the handset to release the hold at the base unit. ® If another phone is connected on the same line {p. 77), you can also release the hold by lifting its handset. c£> Making Calls Simultaneous Keypad Dialing You can use the base unit like a standard telephone. After pressing iTALKl to make a call with the handset near the base unit, you can also dial using the base unit keypad. 1 Handset: Press [TALK). O Base unit: ^ Dial a telephone number while hearing a dial tone on the handset. ° When the other party answers, talk using the handset. Q Handset: ^ To hang up, press ITALKl or place the handset on the base unit. Simultaneous Keypad Dialing is available only after pressing I REMOTE SP] (p. 37) or I TALK]. Useful information You can enter numbers using the base unit keypad during a call with the handset. For example, to access an answering service, electronic banking service, etc, 1. Handset: Press [TALK]. 2. Handset: Dial a telephone number. « You can also dial with the base unit keypad. 3. Base unit: Enter the required numbers while listening to the pre-recorded instructions. 4. Handset: To hang up, press ÎTALK] or place the handset on the base unit. 34 Answering Calls If you subscribe to a Caller ID service, the calling party information will be displayed on the handset after the first ring (p. 42). In order to view the CALLER ID information, please wait until the second ring to answer a call. With the Handset If the handset is off the base unit, press iTALKl. ® You can also answer a call by pressing any dialing button (o) to ©, ® or (¥) (— Any Key Talk). OR If on the base unit, just lift up. (This is not available when the Auto Talk feature is set to OFF. See page 20.) With the Base Unit 1 Press I DIGITAL SP-PHONE). Talk into the MIC. To hang up, press i DIGITAL SP-PHONEl. I DIGITAL SP-PHONEl Remote Speakerphone You can easily switch a call from the handset to the speakerphone. 1 Handset: During a call with the handset, press {REMOTE SPl. o The call is switched to the base unit. © The INTERCOM indicator flashes and “Remote sp-phone” is displayed. oThe DIGITAL SP-PHONE indicator lights. Base unit: Talk into the MIC. Base unit: To hang up, press I DIGITAL SP-PHONE I. © The indicator lights go out. o You can also hang up by pressing [REMOTE SP{. INTERCOM Indicator (TALK) I REMOTE SPI MIC 36 You can turn on the base unit speakerphone using the handset as a remote control. Making calls using the handset as a remote control 1. Handset: Press (REMOTE SPl. 2. Handset: Dial a telephone number. © You can also dial with the base unit keypad. 3. Base unit: Talk into the MIC. 4. Handset: To hang up, press [REMOTE SPl. • You can also hang up by pressing [DIGITAL SP-PHONE-]. When you redial A number dialed with the handset keypad is saved in the handset. A number dialed with the base unit keypad is saved in the base unit. To switch to the handset (while using the remote speakerphone) Press (TALK). • You can continue the conversation using the handset. • To hang up, press iTALKl or place the handset on the base unit. Answering calls using the handset as a remote control 1. Handset: Press I REMOTE SR. 2. Base unit: Talk into the MIC. 3. Handset: To hang up, press (REMOTE SPl. • You can also hang up by pressing I DIGITAL SP-PHONEl. Speed Dialer (Handset) Storing Phone Numbers in Memory You can store up to 10 phone numbers in the handset. The dialing buttons ((o) to (9)) function as memory stations. The TALK indicator light must be off before programming. 1 38 Press I PROGRAM!, o The TALK indicator flashes. 2 Press SEARCH 0 (Yes key). 3 Enter a phone number up to 22 digits. <* If you misdial, press (CLEAR). Digits are erased from the right. Press lAUTOl. Save AUTO# ? v=Next a=Yes Enter phone no. 3334444 AUTO=Save Select 0-9 to save in AUTO ^ Press a memory station number ((o) to (9)). © A long beep sounds. © The handset will return to the stand-by mode. 3334444 Save in AUTO 1 ©To store other numbers, repeat steps 1...