Stimmen - 8, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
If you have touch tone service, set to TONE. If rotary or pulse sen/ice is used, set to PULSE. Your phone comes from the factory set to TONE. The TALK and SP-PHONE indicator lights must be off before programming. 1 Press (PROGRAM). oThe TALK indicator flashes. Press (auto). To select PULSE, press (#) twice. OR To select TONE, press ® twice. ^ When finished, press [PROGRAM). oA beep sounds. 0T0 cancel during programming, press (PROGRAM), then start from step 1. o|f 3 beeps sound during programming, —a wrong key was pressed. Restart from step 1. —the handset is too far from the base unit. Move closer to the base unit or place the handset on the base unit. Restart from step 1. j • ■ ~ ~ ■ ■ ———— ----- If a power failure occurs, the mode will return to the factory preset (TONE). Reprogram if necessary. 10 Selecting the Ringer Volume With the handset The TALK indicator light must be off. •To select HIGH (preset) or LOW, press [RINGER]. (Each time you press the button, the selected volume will ring and the ringer volume will change.) •To turn the ringer OFF, press and hold (RINGER] until 2 beeps sound. •To turn the ringer ON, press [RINGER]. The ringer will sound at the HIGH level. With the base unit The TALK and SP-PHONE indicator lights must be off. •To select HIGH (preset) or LOW, press (HOLD/RINGER]. (Each time you press the button, the selected volume will ring and the ringer volume will change.) •To turn the ringer OFF, press and hold [HOLD/RINGER] until 2 beeps sound. •To turn the ringer ON, press [ HOLD/RINGER], The ringer will sound at the HIGH level. 11 ф- Settings Using the Belt Clip You can hang the handset on your belt or pocket using the belt clip. To install the belt clip To remove the belt clip ► > О о ООО Qqo , o° PJD.oJ Using the Optional Headset Plugging an optional headset into the handset allows a hands-free phone conversation. Please use only the Panasonic KX-TCA90 headset. To order, call the accessories telephone number on page 2. Microphone Earpiece Connecting the optional headset to the handset Open the headset jack cover and connect the optional headset to the headset jack as shown. When the optional headset is connected, make sure to use the headset to talk with the caller. If you want to have a normal cordless phone conversation, disconnect the headset. How to wear the optional headset 1 Place the headset on your Q Adjust the microphone to a head and attach the clothing C- comfortable position, dip to the desired position. sp|ace ^ microphone near your mouth. Making Calls To have a hands-free conversation, connect the optional headset to the handset and wear it (p. 13). With the Handset -| Press (TALK]. »The TALK indicator lights. Dial a telephone number. To hang up, press (TALK) or place the handset on the base unit. ©The indicator light goes out. [TALK] and Indicator (LOUD) (REDlAL/PAUSEj iCH) • If an alarm tone sounds in step 1, move closer to the base unit or place the handset on the base unit. Then try again. •To switch to the speakerphone during a call with the handset, see page 20. To redial the last number dialed on the handset Press [TALK] * REDIAL/PAUSE . 14 To select the handset receiver volume Press [LOUD] while talking. • Each time you press the button, the volume level will change from MEDIUM (preset) to HIGH to LOW. If noise interferes with the conversation Press [ CH) to select a clearer channel or move closer to the base unit. Lighted handset keypad The handset dialing buttons will light when you press a button or lift the handset off the base unit, and flash when a call is received. The lights will go out about 10 seconds after pressing a button, lifting the handset or answering a call. ^ Making Calls With the Base Unit 1 2 3 4 Press ISP-PHONE). «The SP-PHONE indicator lights. Dial a telephone number. When the other party answers, talk into the MIC (microphone). To hang up, press (SP-PHONE). ©The indicator light goes out. (REDIAL/PAUSEl VOLUME 0, 0 MIC ©For best speakerphone performance, use in a quiet room and talk alternately with the caller. ©If the other party has difficulty hearing you, press VOLUME 0 to decrease the speaker volume. Decreasing the speakerphone volume will increase the microphone sensitivity. ©To switch to the handset while using the speakerphone: —If the handset is off the base unit, press (TALK]. —If on the base unit, just lift up. • During a call using the handset, the call cannot be switched to the speakerphone by pressing (SP-PHONE). To switch to the speakerphone, press (REMOTE SP) on the handset (p. 20). To adjust the speaker volume (12 levels) while talking To increase, press VOLUME 0. To decrease, press VOLUME (V). To redial the last number dialed on the base unit Press (SP-PHQNE) # [REDIAL/PAUSE]. To put a call on hold Press (HOLD/RINGER]. •The SP-PHONE indicator flashes. To release the hold From the base unit, press [SP-PHQNE). Fro...