Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
oEach time you press, the volume level will change. 20 Answering Calls With the Handset You can also answer the call by pressing any dialing button (0 to 9, *, or #) Ringer Volume Be sure the TALK and INTERCOM indicator lights are off To set the volume to HIGH (preset) or LOW, press (VOLUME/RINGER) • Each time you press, the bell sounds and the ringer volume will change To turn the ringer OFF, while pressing fVOLUME/RINGER] press (o) until 2 beeps sound To turn the ringer ON, press (VOLUME/RINGER] •The ringer will sound at the HIGH level £> Answering Calis With the Base Unit Press (SP-PHONEl. Speak into MIC. 3To hang up, press ISP-PHÖNE). oFor best performance of the speakerphone, use in a quiet room and speak alternately with the caller. oWhen using the speakerphone, if the handset is on the base unit, you may switch to it by lifting up. To set the ringer volume Set the RINGER selector to HIGH, LOW, or OFF. oWhen set to OFF, the base unit will not ring. To adjust the speaker volume (8 levels) To increase, press /v To decrease, press \x. To put a call on hold Press fHOLPl. o|f a call is put on hold for over 6 minutes, a warning tone will sound. The call will be disconnected after a total of 10 minutes. To release the hold Press f SP-PHQNE) or lift the handset from the base unit. o|f another phone is connected on the same line, you can also lift that handset to release the hold feature. Wi RINGER Selector fHOLPl 22 Automatic Dialing Storing Phone Numbers in Memory The dialing buttons of the handset (0 to 9) function as memory stations. •The TALK indicator light must be off. A Press (PROGRAM/2WAY REC]. •The BATT LOW/PROG indicator lights. 2 Enter a phone number up to 16 digits. • If you misdial, press [PRQGRAM/2WAY REC] to end storing, then restart from step 1. Q Press [AUTO). — Confirmation tone meaning 1 beep: The number is newly stored. 2 beeps: The number is the same as a previously stored one. 3 4 Press a memory station number (0 to 9). •Confirmation tone sounds. (See below.) •To store other numbers, repeat steps 1 through 4. [PRQGRAM/2WAY REC) $> Automatic Dialing To erase a stored number Press (PR0GRAM/2WAY RECl e> [AUTO] e> the memory station number to be erased Memory sticker You may use an included memory sticker as memorandum for automatic dialing Write down the names or phone numbers, then attach it to the unit or at a convenient place Special Features Automatic Security Code Setting Whenever you place the handset on the base unit, the unit automatically selects one of 65,000 security codes. These codes help to avoid unauthorized use of your telephone line by another cordless telephone. For Call Waiting Service Users Press (FLASH) lightly if you hear a call-waiting tone during a conversation. •The first call is put on hold and you can answer the second call. •To return to the first call, press [ FLASH) again. Temporary Tone Dialing (For Rotary Service Users) Press [TONE) before dialing. •The dialing mode changes to tone. You can enter numbers to access the answering system or electronic banking services, etc. When you hang up, the mode returns to pulse. If Your Unit is Connected to a PBX We recommend you press (REDiAL/PAUSE) between the access number for an outside line and the phone number. •Pressing (REDIAL/PAUSE) once makes a 3.5-second pause and prevents misdialing when you redial or dial a stored number. Sntereom 2-way intercom is available between the handset and the base unit. Paging the base unit from the handset Handset: Press [INTERCOM), then speak. 0T0 end the intercom, press [INTERCOM]. 26 Paging the handset from the base unit (Handset locator) Using this feature, you can locate the handset if it is misplaced. Base unit: Press [ locator/intercom!. ©The handset beeps for 1 minute. ©To stop paging, press f locator/intercom]. Handset: Press (intercom) to answer. ©To end the intercom, When using the intercom: ©Intercom calls can only be ended with the handset. ©If the handset user has difficulty hearing the base unit user, decrease the speaker volume by pressing \/. ©If two tones sound, it means there is an incoming call. To answer press (TALK) or ¡SP-PHONE). The intercom is ended. 27 e> Intercom Transferring si Call Using Intercom You can transfer an outside call between the handset and the base unit using intercom. From the handset to the base unit -{ HANDSET7 )- 1 During a call, press (INTERCOM), then speak to the base unit user. oThe call is put on hold. { BASE UnTF When the paging party’s voice is heard, answer into the MIC. To answer the call, press (SP-PHONE). ©The transfer is completed, o Handset user may join the conversation by pressing [TALK). From the base unit to the handset -f BASE UNIT } During a call, press (HOLDI oThe call is put on hold. oThe SP-PHONE indicator flashes. Press [ LOCATOR/INTERCOM) to page the handset. When the handset beeps, press (INTERCOM) to answ...