Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
The user interface waits at each letter position until a key is pressed, then stays there until no key is pressed for 3 seconds, at which point it moves on to the next letter position. The user can correct entries using the 5(6) key. • Pauses in the dialling sequence may be programmed as part of the number by pressing the Pause (REDIAL/INT) (4) key during the number sequence. • Holding down the NO (5) key at any point allows the user to abort the procedure. EDITING A MEMORY ENTRY Both the alpha name field and the phone number field of a memory entry can be edited. This allows the user to change entries whose names have been misspelled or when their contacts move house. • Select to the “PHONE BOOK” by pressing scroll keys 5/6(6), then press YES (3). • Select “EDIT” by pressing scroll keys 5/6(6) then press YES (3). • Press scroll keys 5/6(6) to select the memory item that user need to edit • Press YES (3) start the editing. (Name then number). 9038_2_ib_e.p65 14 10/31/03, 12:20 PM MEMORY OPERATION DELETING A MEMORY ENTRY Memory deletion is considerably simpler than adding new memory entries. • Enter Phonebook mode by pressing scroll keys 5/6(6) and YES (3). • Then select “DELETE” by pressing scroll keys 5/6(6) and YES (3). • Press scroll keys 5/6(6) to select the memory to be deleted from the Phonebook. • Press YES (3) to confirm the selection. “SURE?” would be shown on. • Press YES (3) to execute the deletion. E - 15 9038_2_ib_e.p65 15 10/31/03, 12:20 PM E - 16 CALLER ID OPERATION These calls can also be dialed out and stored into the phone book. Remark: To use the caller-ID operation, you have to subscribe the caller-ID service from your operator. DIAL FROM CALL RECORD • Press scroll keys 5/6(6) to select “CLI RECORD”, then YES (3) to confirm. • Press scroll keys 5/6(6) to select “VIEW” then YES (3) to confirm. • Press scroll keys 5/6(6) to select the record to be dialed then YES (3) to dial it out. SAVE THE CALL RECORD TO PHONE BOOK • Press scroll keys 5/6(6) to select “CLI RECORD”, then YES (3) to confirm. • Press scroll keys 5/6(6) to select “STORE PBK”, then YES (3). • Press scroll keys 5/6(6) to select the record to be stored then YES (3) to store it. • Enter the name then confirm by YES (3). DELETE ONE CALL RECORDS • Press scroll keys 5/6(6) to select “CLI RECORD”, then YES (3) to confirm. • Press scroll keys 5/6(6) to select “DELETE ONE”, then YES (3). • Press scroll keys 5/6(6) to select the call record to be deleted then YES (3) to confirm. • Display will show “SURE?” to confirm the deletion. • Press YES (3) again to execute the deletion. 9038_2_ib_e.p65 16 10/31/03, 12:20 PM CALLER ID OPERATION DELETE ALL CALL RECORDS • Press scroll keys 5/6(6) to select “CLI RECORD”, then YES (3) to confirm. • Press scroll keys 5/6(6) to select “DELETE ALL”, then YES (3). • Display will show “SURE?” to confirm the deletion. • Press YES (3) again to execute the deletion. CALLER-ID WITH CALL WAITING During phone conversation, when there is incoming call from a third party, you will hear beep tone from the handset receiver and the display will show the telephone number of the third party. • Simply press YES (3) to switch the line to the third party. • Press YES (3) again if you want to switch the line back to the original party. E - 17 9038_2_ib_e.p65 17 10/31/03, 12:20 PM E - 18 TELEPHONE SETTINGS RINGER VOLUME Ringer volume is set by following procedure. • Press scroll keys 5/6(6) to select “RINGER” and press YES (3) to confirm. • Press scroll keys 5/6(6) to select “VOLUME” and press YES (3) to confirm. • Press scroll keys 5/6(6) to select Volume level (RING * to RING ******) • Then press YES (3) to confirm the setting. Note : The ringer volume setting is applied to internal calls, external calls. RINGER MELODY The user will be able to choose the ringer melody from a list of pre-set tones. Set the ringer melody for external call (Incoming call) • Press scroll keys 5/6(6) to select “RINGER” and press YES (3) to confirm. • Press scroll keys 5/6(6) to select “EXTERNAL” and press YES (3) to confirm. • Press scroll keys 5/6(6) to select RING NUMBER and press YES (3) to confirm. Set the ringer melody for Internal call (Intercom) • Press scroll keys 5/6(6) to select “RINGER” and press YES (3) to confirm. • Press scroll keys 5/6(6) to select “INTERNAL” and press YES (3) to confirm. • Press scroll keys 5/6(6) to select RING NUMBER and press YES (3) to confirm. Note : When one of the melodies has been selected, the corresponding melody will sound. However, this melody would not be set until YES (3) is pressed. RECEIVER VOLUME Receiver volume is set using the scroll keys during the talk mode. 9038_2_ib_e.p65 18 10/31/03, 12:20 PM E - 19 TELEPHONE SETTINGS KEYPAD There are two user options for the keypad, The keypad can be locked to prevent unintended operation • Press scroll keys 5/6(6) to select “KEYPAD” and press YES (3) to confirm. • Press scroll keys 5/6(6) to select “KEY LOCK” and press YES (3) to lock the key pad. Onc...
Dieses Handbuch ist für folgende Modelle:Schnurlostelefone - TL9038 (1.09 mb)