Anleitung Cisco Systems, modell 2020

Hersteller: Cisco Systems
Dateigröße: 2.13 mb
Dateiname: icarus2020-use-guide-for-uk-_v01_may-07-08.pdf

Unterrichtssprache:

Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite

Anleitung Zusammenfassung

Press will have no effect and an alert tone is emitted. 1. Press

and to select ANS. MACHINE. 4. Press and to select your desired OGM language. 7. Press to confirm, and the chosen handset will be de-registered. registered to your base unit. You can turn on or off the answering machine through the base or handset. Listen new messages through the Handset: 2. Press and to select DELETE ALL. 5. Press to confirm. You can register additional handsets to have up to five handsets per base unit, When the answering machine is set to ON, calls will be answered after the set 1. Press and to select ANS. MACHINE. 2. Press to confirm. 8.5.3 Record Your Own Outgoing Message (OGM) 7.4.4 Change the dial mode with each handset's number (1 to 5) shown on its display. (Note: each handset answer delay and the caller can then leave you a message. When the answering 2. Press and to select MSG PLAYBACK. 3. Press to delete all old messages. You should normally leave the dialling mode at its default setting of TONE (also can only be registered to one base.) machine is set to OFF, calls will be answered after 10 rings and the answer only 3. Press to start message playback and the screen displays the date and Note: If there are no more messages in the answering machine, “EMPTY” will You can record your own OGM for ANS & REC mode or ANSWER ONLY mode. called DTMF) unlessthe phone is connected to an old exchange that only To register a new handset to your base: message will be played to your callers. They will not be able to leave you a time information of the message received. display and return back to ANS. MACHINE menu. When you record your own OGM, it will be used when the answering machine answers the call. If your personalised OGM is deleted, the pre-set OGM will be recognises PULSE dialling. message. 1. Press and hold on the base station for more than five seconds, to Note: is placed at the centre of the bottom of the LCD to indicate 8.4 Record Memo restored automatically. Note: If PULSE dialling is set, you can press the * key to switch to TONE dialling put the base station into registration mode. It will stay in registration mode Through the Base: that it is a new message. If this message has been read or listened, the You can record your memo message for another user. When you record a memo, 1. Press and to select ANS. MACHINE. for the rest of that call. for about 1 minute, so the following handset sequence must be completed 1. Press on the base station. will disappear and will be reflected next time when you listen to the message counter will increase by one and the message can be played back this message again. 2. Press and to select TAM SETTINGS. 1. Press and to select BS SETTINGS with in this time. • If answering machine is set to ON, displays on the handset in the same way as answering machine messages. Memo recording can still 3. Press and to select OGM SETTINGS. 2. Press and to select DIAL MODE. 2. Press and to select REGISTRATION. LCD and the 7-seg LED on the base station will display the number of Note: If there are no messages, the handset display will briefly show function even when the answering machine is turned off. 4. Press and to select ANS & REC or ANSWER ONLY. 3. Press and to select TONE or PULSE 3. Press and you are requested to enter the 4-digit system PIN. incoming messages. "00-00 00-00" then return to MSG PLAYBACK. 5. Press and to select RECORD MESS. (The current setting is indicated by an asterisk to the right). 4. Enter the 4-digit system PIN. • If answering machine is set to OFF, will disappear from the 4. During message playback, press or to increase or decrease 1. Press and to select ANS. MACHINE. 6. Press to start recording your personalised OGM and “RECORDING” 4. Press to confirm. 5. Press to confirm, and the display will show SEARCHING. handset LCD and the 7-seg LED on the base station will display - -. the message playback volume respectively. 2. Press and to select MEMO. is displayed on the screen. 7.4.5 Change the Flash (Recall) Time If the handset registration is successful, you will hear a confirmation tone and the Through the Handset: 5. Press and to select STOP, FORWARD, PREVIOUS, 3. Press to start memo recording and “RECORDING ” is displayed. 7. Press to stop and save your personalised OGM. Your newly saved will stop flashing. 4. Press to stop memo recording and save the memo. OGM will playback automatically. 1. Press and to select ANS. MACHINE. DELETE to perform the following functions during message playback. You may need to change the recall (fl...

Dieses Handbuch ist für folgende Modelle:
Schnurlostelefone - 2020 (2.13 mb)
Schnurlostelefone - 2020 (2.13 mb)
Schnurlostelefone - 2020 (2.13 mb)
Schnurlostelefone - 2020 (2.13 mb)

Alle anzeigen

Herunterladen