Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
If you want to end the intercom transfer, hang-up the phone. To Set up a three-way conference During an external call it is possible to conference in another handset. During a call, press INTERCOM button and enter the number of the handset you want to connect to, by using the keypad. The display will show the handset name you have entered and the other handset will ring. If the number you have entered is not available, you will hear an ERROR tone and the call will be returned to the original handset. If you do not enter any number within 30seconds the call will also be returned to the original handset. Once the other handset answers the call, press STAR( ) button and the display will change from "INTERCOM" to "CONFERENCE", and both the base and the cordless handset will be connected to the external call. When either the base or the handset hangs up, the other will still be connected to the external call. Receiving a conference call. When you receive intercom ringing from a handset, answer the call and the display will show "INTERCOM". Then wait for the other handset to initiate the three-way conference call. Either handset can just hang-up to end the call and the other handset will still be connected. Binatone Help Line : 0845 345 9677 22 Page / locate a handest Press the INTERCOM button. If you have only one cordless handset registered to the base, the display will show "CALLING HS1" and the base will beep. If you have more than one handset registered to the base, the display will show "HS?" with the registered handset numbers above, and the base will output a continuous beep, until you press the number for the handset you want to page. Then the display will change, for example, to "CALLING HS2", if it is handset 2 that is being paged. If you enter a number that is not available the base will return to idle mode. If you do not enter any number for 1 minute the handset will return to idle mode. Handset registration To register new handsets to the base: ! The handset(s) supplied with your CC2310 system are already registered — the first one as handset number 1, the second as number 2...etc You don’t need to re-register them, unless you have a problem. To check whether a handset is registered, make sure mains power to the base unit is switched on and the handset is within range. The handset’s display should show its number, and the ‘signal level’ symbol on the display should show three bars. If the display shows "UNREGISTERED" , you need to re-register the handset using the following process: You need to operate the base and handset together: 1. On the handset, press the MENU/OK button to see "PHONEBOOK". 2. Press the UP button twice to see "REGISTRATION". 3. Press the MENU/OK button to see "BASE 1". If the handset already has a registration to a base there is a "+" on the right side of the display, and you should choose another base number if you don't want to lose that one. Binatone Help Line : 0845 345 9677 23 To de-register a handset using the CC2300 base menu With the base in idle mode: 1. Press the MENU/OK button to see "PHONEBOOK" 2 .Press the DOWN button twice to see "SETTINGS" 3. Press the MENU/OK button to see "DELETE HS" 4. Press the MENU/OK button to see " HS 1 " (or 2,3, 4) Press UP or DOWN button to select the handset you want to de-register. 5. Press the MENU/OK button to confirm, and the selected handset will be de-registered. (The display on the handset that has been deleted will show "UNREGISTERED".) * * Press the PHONEBOOK/BACK button to return to the previous menuat any time. Note: Handsets can also be de-registered using another cordless handset, as described in the cordless handset user guide. Binatone Help Line : 0845 345 9677 24 4. Press the DOWN button to select a base number (BASE 1, 2,3 or 4) 5. Press the MENU/OK button to see "PIN ?" Key in the 4 digit PIN code for the base - the CC2300 default PIN code is 0000 6. Press the MENU/OK button to confirm, and the display will flash "SEARCHING 1" (or 2,3,4) 7. At the same time, on the base, press the MENU/OK button to see "PHONEBOOK" 8. Press the UP button tweice to see "REGISTRATION" 9. Press the MENU/OK button to see "SEARCHING" flash on base display After a short delay, if the registration is successful, there will be a confirmation beep, and the Handset display will go back to idle mode with number shown (e.g. HS1, HS2). The base display will also go back to idle mode. To de-register a handset You may need to do this if you need to replace a faulty handset. Call the Binatone help line if you need more advice. SOS call function The SOS call function is very useful for people at home to make an emergency call to ask for help from their relatives, police, doctor, etc. How SOS call function works .. Press and hold SOS button for more than 2 seconds. .. The line is automatically seized and dials to each of the pre-stored SOS numbers, starting with the first. and it will wait for 1 minute and then drop the call. .. The line is automaticall...
Dieses Handbuch ist für folgende Modelle:Schnurlostelefone - 2300 (4.43 mb)
Schnurlostelefone - 2300 (4.43 mb)
Schnurlostelefone - 2300 (4.43 mb)
Schnurlostelefone - 2300 (4.43 mb)