Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Never try to lengthen the mains power cable. Note: The base unit needs mains power for normal operation, not just for charging the handset batteries. 1.2 Installing and charging the batteries 1) Place the supplied battery pack into the battery compartment with the battery plug lully inserted in the socket as shown. Use only the NiMH rechargeable battery type provided. 2) Position the battery compartment cover over the batteries and slide up to click into place. 3) Put the handset on the base and charge for 15 hours before using the handset for the first time. The handset will give a beep when it is properly placed on the base or charger. If you have a Broadband line If you connect your telephone to a line with a broadband connection, you will need to insert a micro-filter between the telephone and the telephone line, otherwise you man get interference between the telephone and the broadband which could cause problems. H? d- SOCKET qJ MICROFILTER In a home with broadband, every telephone must have a micro-filter connected, not just the one at the telephone point that your modem is connected to. If you need more broadband micro-filters, contact your broadband supplier. 3.4 Base 0F-> -0n-> XX 00 XX ZZ XX/FF FF --/XX XX A1/A2 XX/An rA LX Two Digit-LED Display Information Displayed when the answering machine is turned OFF Displayed when the answering machine is turned ON where XX is number of messages in TAM memory. Steady ON: No voice messages in the TAM. Flashing: There are XX new messages recorded where XX is from 01 to 59. Steady ON: There are ZZ old messages in the TAM memory and no new messages. Flashing XX alternately with FF: There are XX new voice messages recorded and the TAM memory is full. Flashing FF: The TAM memory is full and there are no new messages. Flashing XX alternately with - The Time/Date is not set and there are XX new messages recorded. Flashing - -: The Time/Date is not set and there are no new messages recorded. XX Steady ON: Playing the current XX old recorded message. XX Flashing: Playing the current XX new recorded incoming message. Steady ON: Playing the current outgoing message (OGM) where A1 is the Answer & Record OGM and A2 is the Answer Only OGM. FlashingXXalternatelywithAn: CurrentlyrecordingthenewXXincomingmessage. Flashing: Remote access is in progress from a handset or via the external line. Steady ON: Indicates the current volume level where X is from 1 to 8. The following functions can be accessed by pressing the relevant keys in idle mode: 3.5 Menu Structure In idle mode, press