Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water (for example, near a bath tub, kitchen sink, swimming pool). Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. Unplug this product from the wall outlet and refer servicing to our Repair Centre under the following conditions: • When the power supply cord or plug is damaged or frayed. • If the product does not operate normally by following the operating instructions. • If the product has been dropped and the cabinet has been damaged. • If the product exhibits a distinct change in performance. NEVER use your cordless telephone outdoors during a thunderstorm -unplug the base from the telephone line and the mains socket when there are storms in your area. Damage caused by lightning is not covered by the guarantee. Do not use the telephone to report a gas leak in the vicinity of the leak. Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation periods for the handsets are only applicable with the default battery capacities. The use of other battery types or non-rechargeable batteries/primary cells can be dangerous. These may cause interference and/or damage to the unitor surroundings. The manufacturer will not be held liable for damage arising from such non-compliance. Do not use third party charging bays, as they may cause damage to the batteries. Please ensure the batteries are inserted in the correct polarity. Dispose of batteries safely. Do not immerse them in water, burn them, or put them where they could get punctured. XX/An Flashing XX alternately with An: Currently recording the new XX incoming message. rA Flashing: Remote access is in progress from a handset or via the external line. LX Steady ON: Indicates the current volume level where X is from 0 to 8 3.3 Display Icons and Symbols The LCD display gives you information on the current status of the telephone. c «ф» |5d| a Q_D m □ 4 ► (MENU) OK Steady when the handset is in range of the base. Flashes when out of range of the base or not registered to the base. Steady when an intercom call is in progress. Flashes during intercom ringing. Steady on when a call is in progress. Flashes when there is an incoming call. On when the speakerphone is turned on. Steady on when the telephone answering machine (TAM) is turned on. Flashes when there is a new TAM messages. Steady on when an alarm is set.n Flashes when the alarm time has been reached.□□ On when the keypad is locked.nn0 On when you have a new Voice Mail message. (This is a caller display service and is not usually available from UK network providers.) Indicates that the handset ringer is switched off. Indicates when the battery is fully charged. Whole icon flashes when the battery is charging. Internal block icon flashes when the battery is in final charging stage. Indicates when the battery needs charging. Flashes when low battery power level is detected. Indicates when there are more characters or numbers in front of those being displayed. Indicates when there are more characters or numbers after those being displayed. Press the MENU/OK key to access a menu list. Press the MENU/OK key to confirm the current selection. Indicates a new TAM message is playing or a new call is being viewed in the Call List. Indicates more options available in lists, above or below. (INT) (BACK) Press the C/®l key to start an Intercom call. Press the C/0I key to go back to previous menu level or cancel the current action. C Press the C/®l key to clear a character or stop the alarm or to mute / unmute the microphone during a call. 3.4 Menu Structure In idle mode, press