Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
1. Press Menu to open the main menu. 2. Use the NAVIGATION buttons to highlight the symbol and press OK to select. 3. Handset Settings is highlighted, press OK. 4. Auto Answer is highlighted. Press the right soft key to select If auto answer is set to On, a 3will be displayed alongside Auto Answer. either On or Off. 5. Press to exit and return to standby. Register a handset At the handset: 1. Press Menu to open the main menu. 2. Use the NAVIGATION buttons to highlight the symbol and press OK to select. If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com Verve 500 – New Style – Edition 3 – 07.09.06 – 7706 Phone settings The default PIN code is 0000. Press to exit and return to standby at any time. When set to On, the handset uses more power and so the talk and standby times will be reduced. 3. Handset Settings is highlighted, press OK. 4. Press UP or DOWN to highlight Register HS. 5. Enter your 4 digit System PIN code, and press OK. Registering … is displayed. At the base: 6. Press and hold , until you hear a beep tone. Release the buttonand the phone will remain in registration mode for 60 seconds while the handset attempts to register with the base. When registration is successful, the new handset will automatically be allocated the next available handset number. This number will be shown in the handset display when in standby mode. Dim mode With Dim mode set to on, after a pre-set period of inactivity, the display backlight will reduce to 10%. With Dim mode set to off, the display will go completely blank after the pre-set period of inactivity. When you press a keypad button, the display backlight will come on as normal. 1. Press Menu to open the main menu. 2. Use the NAVIGATION buttons to highlight the symbol and press OK to select. If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com Verve 500 – New Style – Edition 3 – 07.09.06 – 7706 3. Handset Settings is highlighted, press OK. 4. Press UP or DOWN to highlight Dim Mode. 5. Press the right soft key to select either On or Off. 6. Press to exit and return to standby. Handset name If you are using more than one handset with your BT Verve 500 base, you can give each handset a personalised name to easily distinguish between the handsets. The maximum number of characters is 12. 1. Press Menu to open the main menu. 2. Use the NAVIGATION buttons to highlight the symbol and press OK to select. 3. Handset Settings is highlighted, press OK. 4. Press UP or DOWN to highlight Handset Name and press OK. 5. Enter a name using the keypad and press OK to confirm. 6. Press to exit and return to standby. Reset your handset You can reset your BT Verve 500 handset to the default (original) settings. Phone settings If Dim Mode is set to On, a 3will be displayed alongside Dim Mode. To delete an incorrect character/digit press soft key. To restore the default name (Handset 1), delete the current name and save a blank entry. When the handset returns to standby mode, the default name will be displayed. If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com Verve 500 – New Style – Edition 3 – 07.09.06 – 7706 Phone settings Please ensure that the phones are working correctly and are fully charged before using the room monitor function. 1. Press Menu to open the main menu. 2. Use the NAVIGATION buttons to highlight the symbol and press OK to select. 3. Handset Settings is highlighted, press OK. 4. Press UP or DOWN to highlight Reset Handset and press OK. 5. Confirm? is displayed. Press OK to confirm or, press to exit and return to standby. Room monitor If you have at least two handsets registered to your BT Verve 500 base you can leave one handset in a room and monitor the sounds in the room by making an internal call to another handset. For example, you could use it in a child’s bedroom. 1. Press Menu to open the main menu. 2. Use the NAVIGATION buttons to highlight the symbol and press OK to select. 3. Handset Settings is highlighted, press OK. 4. Press UP or DOWN to highlight Room Monitor and press OK. 5. Call To: is displayed. Enter the number of another handset registered to the base that you are going to use to monitor, e.g. 2 and press OK. 6. Room Monitor On is displayed on the ‘listening’ handset. If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com Verve 500 – New Style – Edition 3 – 07.09.06 – 7706 7. Press or on the other handset to start monitoring. If the ‘listening’ handset detects any noise it will ring the other handset. Base settings System PIN code Your BT Verve 500 has a system PIN code which you will need to change various settings on your phone. The default PIN code is 0000. You may want to change this to prevent unauthorised changes to your settings. 1. Press Menu to open the main menu. 2. Use the NAVIGATION buttons to highlight the symbol and p...