• Note the serial number on the bottom of your radio and write this number in the space provided on Page 2 of this manual. • Place your radio on a level surface such as a table, desk or shelf, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration. NOTE: Do not place this radio on a metal shelf, metal table, or other metal surface as this may interfere with AM reception. • Unwind the AC power cord and extend it to it

To stop playback before the disc ends press the STOP button on the front panel. The disc stops and the display briefly shows the total tracks on the disc and then returns to the correct time. 8.) If you are finished listening open the CD door and remove your disc. 9.) To listen to the radio slide the function selector switch (CD/FM AUTO/AM) to the FM AUTO or AM position, or press the POWER ON/OFF button to turn the power ‘Off’. Note: To see the CD track number during playback, press the TIME/DIS

A fresh lithium battery can supply power to the SmartSet® computer for at least 3 years even if it is never connected to an AC power supply. If your radio was connected to your AC supply within a few months after it was manufactured, and you experience only the normal, nuisance type, short duration power interruptions, your battery may last for up to 5 years or even longer. When the battery power drops below a certain level, the BATT LOW indicator will come on. When you see this indicator, you s

Track 7 is now entered in Program Memory number “01”. The program memory number now advances to number “02” and continues flashing. PROGRAM 4.) Repeat step 3, selecting a different track number each time until you have entered up to 20 tracks in the program memory. To confirm the program after you have entered the last track press the PROGRAM button once more. The display will scroll through all the tracks you programmed in sequence. 5.) When you have completed programming the desired tracks pre

Plug a connection cable (not included) between the AUX or LINE OUT jack on the external audio unit and this unit's AUX IN jack (side of the unit). (Do not connect it to this unit's HEADPHONE jack.) Turn on the external audio unit and start playback; the external unit's output sound will be heard through this unit's speakers. Rotate the VOLUME control to adjust the volume level as desired. To turn the unit off, remove the plug from the AUX IN jack, then slide the Function switch to OFF. 13 OPERAT

2. SNOOZE/SLEEP OFF/RADIO OFF Button. 3. RADIO ON Button. 4. ALARM Button. 5. MINUTE Button. 6. CLOCK Button. 7. HOUR Button. 8. SLEEP Button. 9. DIMMER (Hi/Lo) Switch. 10. ALARM(OFF/RAD/BUZ) Switch. 11. VOLUME Control. 12. Clock Display. 13. AM/FM Band Switch. 14. Dial Scale and Pointer. 15. TUNING Control. SURE-ALARM BATTERY BACK UP SYSTEM This clock radio includes abattery back upsystem thatwill maintain thecorrect time andalarm settings in case of a temporary power interruption. Aslongas the

Micro Motion customer service Location Telephone number Email U.S.A. 800-522-MASS (800-522-6277) (toll free) flow.support@emerson.com Canada and Latin America +1 303-527-5200 (U.S.A.) Asia Japan 3 5769-6803 All other locations +65 6777-8211 (Singapore) Europe U.K. 0870 240 1978 (toll-free) All other locations +31 (0) 318 495 555 (The Netherlands) Contents Contents Chapter 1 Planning ..................................................................................................................

13 CKS2235_032106.p65 13 21/3/2006, 11:00 RADIO AND BUZZER OPERATION You may also set one alarm for wake to radio and the other for wake to buzzer. Just set the ALM 1 and ALM 2 selector switches to the desired positions. SNOOZE ALARM After the alarm turns on in the morning you can use the Snooze function to grab a few more minutes sleep before the alarm sounds again. To activate the Snooze function you can press the SNOOZE (SLEEP OFF) button on the top cabinet. If you set WAKE TO BUZZER, you can

Note: If you manually adjust the time, your new setting is entered into the SmartSet® memory. If the power is interrupted, the display will return to your new setting, not the original setting, when the power is restored. ADJUSTING THE WAKE UP TIMES Your SmartSet® alarm clock has two separate alarms that can be set and used independently. You may use the alarms to wake two people at different times, or you may use one alarm for weekdays and the other for weekend wake up times. The procedure for

You should have your outlet changed by a qualified licensed electrician. 3 LOCATION OF CONTROLS AND INDICATORS 1 234567 27 26 8 9 10 11 181920212223 1 2 3 8 1 2 1 2 15 16 13 17 24 14 25 Top Panel Right Side 1. Alarm 1 setting button. 15. Volume control. 2. Alarm Mode button. 16. Band switch (AM/FM). (weekdays/weekends/everyday alarm)17. Tuning control. 3. Time Zone button. 4. Time setting button. Front Panel 5. Date setting button. 6. Down button. 18. Alarm 1 ‘On’ indicator. 7. Up button. 19. AM