Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
12.Use only witha cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13.Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Tuning Turn to adjust the AM or FM radio frequency. Volume Turn to adjust the volume. AM/FM ST. Use to adjust the radio mode to AM or FM. Backup Battery Compartment Requires one 9 volt battery (not included). CUSTOMER HELPLINE | 1-314-621-2881 GPX | CC319B CUSTOMER HELPLINE | 1-314-621-2881 GPX | CC319B AC Power Battery Backup Setting the Clock Tuning the AM or FM Radio Playing a CD Playback Features Improving Radio Reception Setting the Alarm Time Choosing an Alarm Source Activating the Set Alarm Gradual Wake - What does it mean? Whenever the alarm sounds on the unit, the volume level will start low and gradually rise until it reaches the level set on the Volume dial. This makes for a considerably less abrupt wakeup call in the morning. Setting the Sleep Timer BASIC OPERATIONS USING THE AM OR FM RADIO USING THE ALARMS POWERING THE UNIT USING THE BUILT IN CD PLAYER Press the POWER button to turn the clock radio off. The Power Indicator Light will go out when the clock radio is powered off. Press and hold the CLOCK ADJUST button for 3-5 seconds. The hour on the clock will begin to blink. Press the CLOCK SET buttons to adjust the hour. Press the CLOCK ADJUST button. The minute on the clock will begin to blink. Press the CLOCK SET buttons to adjust the minute. Press the CLOCK ADJUST button to finish setting the clock. Plug the attached AC cord into a standard AC outlet to power the unit. Requires one 9 volt battery (not included). Connect a 9 volt battery to the battery leads inside of the battery compartment on the bottom of the unit to power the battery backup. The battery backup is meant for short term power loss only. The clock and alarm settings are the only settings retained in the event of a short term power loss. The radio and CD player will not work when the unit is powered solely by the battery backup. Press the POWER button to turn the clock radio on. The Power Indicator Light will illuminate when the clock radio is powered on. Adjust the BUZZ/RADIO/CD switch to Radio. Adjust the AM/FM ST. switch to the desired radio band. Turn the TUNING dial to adjust the AM or FM radio frequency. Press the POWER button to turn the clock radio on. The Power Indicator Light will illuminate when the clock radio is powered on. Adjust the BUZZ/RADIO/CD switch to CD. Open the CD DOOR, load a CD into the clock radio, and close the CD DOOR. The CD needs to be loaded with the label-side facing up. Press the PLAY/PAUSE button to begin playing the loaded CD. Play/Pause Press to Play or Pause the CD. Skip/Search Press to Skip to the previous or next track. Press and hold to rewind or fast-forward within a single track. Stop Press to Stop the CD. Repeat Press to repeat the current track. The Repeat Indicator Light will blink when the clock radio is set to repeat a single track. While set to repeat a single track, press to repeat the entire CD. The Repeat Indicator Light will illuminate solid when the clock radio is set to repeat the entire CD. Random Press to play tracks in a random order. Adjust the attached FM Wire Antenna to improve FM radio reception to the clock radio. An AM Antenna is built into the clock radio. Adjust the position of the clock radio to improve AM radio reception. Press the POWER button to turn the clock radio off. The Power Indicator Light will go out when the clock radio is powered off. Press the AL1 or AL2 button to display the alarm 1 or alarm 2 time. Press and hold the AL1 or AL2 button for 3-5 seconds. The hour on the alarm time will begin to blink. Press the CLOCK SET buttons to adjust the alarm hour. Press the AL1 or AL2 button. The minute on the alarm time will begin to blink. Press the CLOCK SET buttons to adjust the alarm minute. Press the AL1 or AL2 button to finish setting the alarm time. After the alarm time is set, adjust the BUZZ/RADIO/CD switch to the desired source. Adjust the VOLUME dial to the desired level. When the set and active alarm time is reached, the unit will power on to the selected source. Press the Power button to turn the clock radio off. The Power Indicator Light will go out when the clock radio is powered off. Press and hold the AL1 button for 3-5 seconds to activate or deactivate alarm 1. The AL1 Indicator will illuminate when alarm 1 is activated. Press and hold the AL2 button for 3-5 seconds to activate or deactivate alarm 2....