Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
. “REP 1” (single repeat) A single track is played repeatedly. . “REP” (all repeat) All the tracks are played repeatedly. . “SHUF” (shuffle play) All the tracks are played once in random order. . “REP SHUF” (shuffle repeat) All the tracks are played repeatedly in random order. Playing the radio –Manual tuning 1 Press RADIO BAND to turn on the radio and select the AM or FM band. 2 Press TUNING + or – to tune in to a desired frequency. 3 Adjust the volume using VOLUME + or –. The frequency display is raised or lowered by a step of 0.1 MHz. (Example: Frequency 88.05 MHz is displayed as “88.0 MHz”.) –Preset tuning You can preset 20 stations for FM and 10 stations for AM. Presetting a station 1 Follow steps 1 and 2 in “Manual tuning” to tune the frequency you wish to preset. 2 Hold down MEMORY/DISPLAY for at least 2 seconds. 3 Press PRESET + or – to select the preset number, then press MEMORY/DISPLAY. The frequency is stored with the selected preset number. Example: The following display appears when you preset FM 105.8 MHz to preset number 1 for FM. . The display shows the frequency for about 10 seconds, and then returns to the current time. To preset another station, repeat these steps. Note If you try to store another station with the same preset number, the previously stored station will be replaced. –Auto preset tuning 1 Press RADIO BAND to turn on the radio and select the AM or FM band. 2 Press and hold RADIO BAND until “Auto” appears in the display. 3 Press MEMORY/DISPLAY. The unit automatically presets the available channels in order. Tuning in to a station 1 Press RADIO BAND to turn on the radio and select the AM or FM band. 2 Press PRESET + or – to select the desired preset number. 3 Adjust the volume using VOLUME + or –. Changing the AM tuning interval The AM tuning interval differs depending on areas. Change the interval if necessary. Press and hold RADIO BAND, ALARM A and BRIGHTNESS/TIME ZONE together for more than 2 seconds. The AM tuning interval will be changed. Note that when the interval is changed, the AM preset stations will be cleared. Improving the reception FM: Extend the FM wire aerial fully to increase reception sensitivity. AM: Connect the supplied AM loop aerial to the unit. Rotate the aerial horizontally for optimum reception. Tip If the FM broadcast is noisy, press MODE to turn off “ST” in the display. The radio becomes clearer although the sound becomes monaural. Notes on radio reception . Keep digital music players or mobile phones away from the AM loop aerial or the FM aerial, as this may lead to interference of reception. . When you are listening to the radio with an iPhone connected to the unit, interference with radio reception may occur. . When you are listening to the radio while charging an iPod, interference with radio reception may occur. Playing an iPod You can enjoy audio from iPod by connecting to this unit. To use an iPod, refer to the user’s guide of your iPod. Notes . When inserting an iPod into th...