Stimmen - 4, Durchschnittliche Bewertung: 2.8
(
)
)
|
Fotos und technische Daten Hyundai H-1615 |
Anleitung Zusammenfassung
. Please observe correct battery polarities or the set will not work. • Close the battery compartment cover. • When the battery is exhausted, it should be removed from the set to prevent leakage. 2 Note: When replacing batteries the stored information will be lost. Time setting • In the clock state, press the CLK.ADJ button once, the hour will flash on the screen. Press the UP and DOWN buttons to set the hour. • Press the CLK.ADJ button again, the minute will flash on the screen. Press the UP and DOWN buttons to set the minute. • Press the CLK.ADJ button again to save the time. Radio operation Power switch • Press the POWER button once to turn the radio on, the last band frequency before turning off the radio is displayed. Press the POWER button again to turn off the radio, the time is displayed. Adjust volume • In receiving state, rotate VOL regulator to adjust volume. Earphones socket • For private listening please insert the earphones into the Phone jack (the speaker inside the radio disconnects automatically), now you can listen to the radio by earphones. Band selection • In receiving state, press the BAND button to choose AM/FM band. Manual search • In receiving state, press the UP and DOWN buttons to select your desired station frequency manually. Each press, the frequency varies one step, until the station is found. Attention: Manual searching station mode is fit to search weak signal stations. Automatic search • In receiving state, keep pressing the UP and DOWN buttons for few seconds, when you see the display frequency automatic change, let go, when there is a station, it will stop searching automatically. • In the course of automatic searching, press the UP and DOWN buttons, it will discontinue searching. Attention: Automatic searching station mode is fit to search strong signal stations. Storing the stations The unit can store up to 10 AM and 10 FM stations. • On radio mode, select your desired band by press UP or DOWN buttons. • Press the PRESET button to enter into the preset mode. The preset number will show on the display. • Press the MEMORY/FC button to select a memory number. Press the PRESET button to confirm your memory setting. 3 Note: If in memory the station frequency already exists, store new frequency according to the above-mentioned methods, the old frequency will be cancelled. Using stored stations • In receiving state, press the MEMORY/FC button to select a stored station. Display backlight • Every time you press any button the display will be lightened in orange for several seconds. Alarm function Setting the alarm Dual snooze alarms function wakes you by the radio or buzzer. For Alarm1 • Press the ALARM1 button. The display will show “0:00” and the “1” icon. The hour will flash. Press the UP and DOWN buttons to set the hour. • Press ALARM1 button, the minute will flash. Press the UP and DOWN buttons to set the minutes. • Press the BAND button to select the way to wake up by: radio or buzzer. • Press the ALARM1 button to confirm settings. For Alarm2 • Press the ALARM2 button. The display will show “0:00” and the “1” icon. The hour will flash. Press the UP and DOWN buttons to set the hour. • Press ALARM2 button, the minute will flash. Press the UP and DOWN buttons to set the minutes. • Press the BAND button to select the way to wake up by: radio or buzzer. • Press the ALARM2 button to confirm settings. Alarm function off • To stop the alarm press the ALARM1 or ALARM2 button once. • To clear the alarm setting, when Alarm1 or Alarm2 activates, press ALARM1 or ALARM2 twice. Snooze function • To stop the sound of Alarm1 or Alarm2 during alarm press SNOOZE button, the buzzer or radio resumes in 9 minutes. Sleep function • The sleep automatic turn off function is set in the radio, it will automatically turn off the radio when sleeping to listen to the radio, in order to avoid wasting power. • With the radio on, press SLEEP button, "90" and “SLEEP” will be displayed. Each press of this button will decrease the sleep timer by 10 minutes up to 10 minutes. • When the timer reaches the preset time, the radio will turn off To cancel the sleep mode press the SLEEP button. 4 Weather function • In normal time mode, if you want to know the current temperature, press the MEMORY/FC button to switch between Fahrenheit or Centigrade temperature indication. Antenna • For FM reception, use the telescopic antenna. Pull out the antenna and change its length and angle for the best reception. Maintenance and care_ • Check your batteries regularly, old or discharged batteries should be replaced. If the unit is not going to be used for some time, remove the batteries to avoid leakage and damage. • When the temperature is under -10C in winter, it will cause the leakage of LCD, in general, please avoid using the radio under low temperature. • Electronic products of this kind should never be subjected to moisture or extreme temperatures. • If ne...