Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
3. To check alarm 2 time, set the Alarm function switch to the ' 2' position. Tim e Alarm / O 21+ 2 1 21+ 2 1 4. Press the Alarm Set button to display the alarm 2 time. Note: The alarm times cannot be checked if the Alarm function switch is in the ' 1+ 2' position. Tim e Set Alarm / O ff If you need any further advice, please call our Technical Helpline on : 020 8758 0338 (Mon-Fri) Setting the Your clock radio natural alarm sounds O ff Natural R adio On 1+ 2 2 1 gradually increase in 1. Set the alarm time as previously switch to the 'Natural' position. Set selector switch to the ' 1', Sounds N atural ' 2' or ' light. 1+ 2' position. The corresponding Alarm indicators will C him es Stream O cean Birds 2. Set theSounds natural switch located on the rear of your clock radio to the desired wake up sound. The coresponding Alarm sound indicator will light up. The natural alarm will sound preset time for 59 minutes. To turn off the alarm the Alarm/Off button. To turn off the alarms permanently set the Function switchto the 'Off' position. PM 3. To sample the alarm sounds set theFunction switch to the 'Natural' position, select the required sound using theSounds natural switch. Press the Snooze button to hear a sample of the alarm sound. This sample facility is not available whilst the alarms are active. 2 Setting the alarms to wake to radio 1. Set the alarm time as previously described. Set theFunction switch O ff Natural R adio On 1+ 2 2 1 to the 'Radio' position. Set the Alarm selector switch to the ' 1', ' 2' or ' 1+ 2' position. The corresponding Alarm indicators will light. Ensure that a station is tuned in and the Volume control is set to the required level. The minimum volume setting on radio alarm is factory set to ensure there is always adequate wake up volume . The radio alarm will operate every day at the preset time for 59 minutes. To turn off the radio alarm until the next day press the Alarm/Off button. To turn off the alarms permanently set theFunction switch to the 'Off' position. Notes: Your clock radio is fitted with a If an alarm time has not been set and theFunction switch is left in the 'Natural' or 'Radio' position, the natural or radio alarms will operate at 12:00 midnight. If you do not require the alarm function, ensure that the Function switch is set to the 'Off' position. PM 1 Snooze The radio or sounds the Snooze button. This sequence sounding. Sleep Alarm / O ff Tim e Sleep timer The radio can be set to turn off after a Press and hold down the Sleep button until the desired time is reached (maximum 59 minutes in 1 minute steps). The sleep time has elapsed. To cancel the sleep function before the preset time Alarm/Off button. PM 1 2 Set Auto Dimmer Auto The Auto Dimmer located on the bottom right side of the LED display will Low High Di automatically adjust the intensity of the clock display to suit room brightness. The display brightness can be further adjusted using the Display dimmer switch located on the left side of your clock radio. m m er Headphones (on rear) AHeadphone Socket(3.5mm) is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeaker. If you need any further advice, please call our Technical Helpline on : 020 8758 0338 (Mon-Fri) General Do not allow this that the FM band quality and freedom MW or LW bands. Mains supply The CR9900 will operate from only. For your convenience this product a fuse of the appropriate rating. If the socket outlet, it should be removed by unscrewing screws, and removing the cable. The correct style of plug to suit your household rated fuse should be fitted. IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN IMPORTANT. DO NOT make any connection to the larger terminal which is marked with the letter E or by the safety earth symbol or coloured Green or Green-and-yellow. The wires in the mains lead are coloured in accordance with the following codes : BLUE - NEUTRAL BROWN - LIVE As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: E L N 3 amp Brown (Live) (Neutral) (Earth) Mains Lead The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must be connected to the terminal marked L Blue or coloured RED. Fuse This apparatus (BS1363). If another plug, adaptor or distribution IF IN DOUBT - CONSULT Back-up Battery (not Slide the battery cover catch in battery cover. Fit a 9 volt IEC size into the compartment. Replace the battery The time and alarm settings will be retained AC mains supply. The LED display will not be extinguished to conserve battery life, but the of the time and alarm time settings. If your clock radio is not to be used for a prolonged the battery to avoid damage by battery leakage. (Underside) Specifications Circuit Features Power Requirements Loudspeaker 8 ohms Mains AC 230 volts, 50Hz only Back-up Battery IEC size 6LR61 (6F22, Output power 350mW Frequency C...