Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Turn on Push the selector upward to turn on the unit. » [Welcome to Digital Radio] (welcome to digital radio) is displayed. » The unit switches to the last selected source. To turn off the unit, push the selector downward. Adjust volume Press / repeatedly to increase/decrease the volume. Connect the earphones Before tune to a radio station, plug the supplied earphoned into the socket on the top of the unit. Otherwise, you can’t listen to the radio. For optimal reception, fully extend your earphones cable and adjust the position of your digital radio. Note • To prevent inter ference, position your digital radio as far as possible from T V, VCR , or other radiation source. Listen to DAB radio Tune to DAB radio stations When you enter the DAB mode for the first time, or the station list is empty, the digital radio automatically scans DAB radio stations, and station list is retained in memor y. Next time when you turn on the unit, the station scan does not take place. 1 Press DAB/FMrepeatedly to select DAB mode. » A bar graph indicates the progress of the search and the number of stations found increase as the scan progresses. Number of Progress bar stations found 2 When scan is completed, » The stations are listed and first available station broadcasts automatically. » If no DAB station is available, [No DAB Station] (no DAB station) is displayed. • Change the location. • Press OK to scan again. To change DAB stations: In DAB mode, press / repeatedly to tune to a desired station, and then press OK to confirm. If not, the radio exits the station list automatically. Scan DAB radio stations automatically Note • New stations and ser vices will be added in the DAB broadcast. To make new DAB stations and ser vices available, per form full scan regular ly. 1 In DAB mode, press MENU to access the DAB menu. 2 Press / repeatedly to display [Full scan] (full scan). 3 Press OK to confirm. » The unit scans all DAB radio stations and broadcasts the first available station. Store DAB radio stations manually Note • You can store up to 10 DAB radio stations. 1 Tune to a DAB radio station. 2 Press and hold PRESET for more than two seconds to activate the storing mode. » [Preset Store] (preset store) is displayed. 3 Press / repeatedly to select a preset number. 4 Press OK to confirm. 5 Repeat steps 1 to 4 to store more DAB stations. Note • To over write a preset station, store another station in its place. Select a preset DAB radio station 1 In DAB mode, press PRESET. 2 Press / repeatedly to select a preset DAB radio station. 3 Press OK to confirm. Note • When you go through the preset station list, if no button is pressed within 15 seconds, the radio tunes to last selected station. Display DAB information 1 Tune to a DAB radio station. 2 Press INFO repeatedly to scroll through the following information (if available): » Dynamic Label Segment (DLS) » Signal strength » Program Type (PTY) » Ensemble name » Channel and frequency » Signal error rate » Bit rate and audio status » Time Use DAB menu 1 In DAB mode, press MENU to access the DAB menu. 2 Press / repeatedly to display the menu options: • [Station list] (station list): display all DAB radio stations that have been found. • [Full scan] (full scan):scan all available DAB radio stations. • [Manual tune] (manual tune): tune to a specific channel/ frequency manually and add it to the station list. • [DRC] (DRC) • [Station order] (station order): change station order. • [Prune] (prune): remove unavailable stations from the station list. • [System] (system): adjust system set tings. 3 To select an option, press OK. 4 Repeat steps 2-3 if sub-option is available under one option. [DRC] (DRC) Dynamic range compression (DRC) adds or removes a degree of compensation for the differences in the dynamic range between radio stations. • [DRC high] (DRC high): set DRC in high level. • [DRC low] (DRC low): set DRC in low level. • [DRC off ] (DRC off ): turn off DRC . Note • DRC only works if it is enabled by the broadcaster for a specific station. [Station order] (station order) • [Alphanumeric] (alphanumeric): list stations in alphanumeric or der. • [Ensemble] (ensemble):list groups of stations that are broadcast together on the same ensemble. [System] (system) • [Backlight] (backlight): select timeout mode for the backlight. • [Language] (language): select a language. • [Factory Reset] (factor y reset): reset all settings to factor y default. • [Software Upgrade] (sof tware upgrade):upgrade software if available. • [SW version] (sof tware version):know the sof tware version of this digital radio. Note • If no button is pressed within 15 seconds, the menu exits. Listen to FM radio Tune to FM radio stations 1 Press DAB/FM repeatedly to select FM mode. 2 Press / repeatedly to tune to a radio station. Scan FM radio stations automatically In FM mode, press OK or press and hold / for more than two seconds. » The unit scans the next available station and broadcasts it automatically. Store FM radio ...