Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
J30-478-SEA ULC US LISTED ATHENA CONTROLS, INC. 5145 Campus Drive Plymouth Meeting PA 19462 U.S.A. Tel: (610) 828-2490 Fax: (610) 828-7084 AthenaControls.com Controller Indicator Transmitter 1/ 32 DIN - 48 x 24 C10 line c cc C UL US LISTED 274.8 information Please, read carefully these proceeding with c cc the installation NOTES ON ELECTRIC SAFETY AND ELECTROMAGNETIC COMPATIBILITY. Class II instrument, panel mounting. This controller has been designed Regulations on electrical (appliance, systems and according to the European Community directive 73/23 CEE amended by the European Comunity directive 93/68 CEE and the Regulations on the essential protection requirements in electrical apparatus EN (IEC 1010 - 1) : 90 +A1:92 + A2:95. Regulations on Electromagnetic Compatibility according to the European Community directive n089/336/CEE, amended by the European Community directive n° 92/31/CEE and the following regulations: Regulations on RF emissions EN50081 - 1 residential environments EN50081 - 2 for industrial environments Regulation on RF immunity EN500082-2 for industrial equipment and system It is important to understand that it’s responsibility of the installer to ensure the compliance of the regulations on safety requirements and EMC. The device has no user serviceable parts and requires special equipment and specialised engineers. Therefore, a repair can be hardly carried on directly by the user. For this purpose, the manufacturer provides technical assistance and the repair service for its Customers. Please, contact your nearest Agent for further information. All the information and warnings about safety and electromagnetic compatibility are marked with the Bsign, at the side of the note. Control Alarms Retransmission PV 1 Single OP1 OP2 OP4output 2 Single OP2 OP1 OP4output 0 Indication OP1 OP2 OP4only Control Alarms Retransmission PV 1 Single OP1 OP2 OP4output 2 Single OP2 OP1 OP4output 0 Indication OP1 OP2 OP4only Table of TABLE OF CONTENTS INSTALLATION...................................................................................................................Page 4 ELECTRICAL CONNECTIONS..................................................................................... Page 8 PRODUCT CODING.............................................................................................................. Page 14 OPERATIONS.....................................................................................................................Page 18 AUTOMATIC TUNE............................................................................................................... Page 28 TECHNICAL SPECIFICATIONS................................................................................... Page 29 1 2 3 4 5 6 Resources Operating mode Main universal input PV Setpoint OP1 OP2 OP4 (option) Modbus RS485 Parameterisation Supervision C10 Fuzzy tuning with automatic selection One shot One shot Auto tuning Natural frequency 1 - Installation INSTALLATION Installation must only out by qualified personnel. Before proceeding with the installation of this controller, follow the instructions illustrated in this manual and, particularly the installation precautions marked with the B symbol, related to the European Community directive on electrical protection and electromagnetic compatibility. B To prevent hands or metal touching parts that may be electrically live, the controllers must be installed in an enclosure and/or in a cubicle. 1.1 GENERAL IP 20 Termination Unit EN61010 - 1 (IEC1010 Product code label Sealin front panel gasket Mounting clamps Front panel IP65 protection EN 60529 (IEC 529) Panel surface 1 - Installation 1.2 DIMENSIONAL 1.3 PANEL CUT-OUT 48 mm 65 mm min 1.89 in 2.56 in min 25 mm 0.99 in 20 mm max 0.79 in max 120 mm 4.72 in 42 mm min. 1.65 in min. 22.2+0.3 mm 0.87+0.01 in 45+0.6 mm 1.78+0.023 in 1 - Installation 1.4 ENVIRONMENTAL RATINGS B Operating conditions M Altitude up to 2000 m T Temperature 0…50°C %Rh Relative humidity 5…95 % non-condensing Special conditions Suggestions M Altitude > 2000 m Use 24V~ supply version T Temperature >50°C Use forced air ventilation %Rh Humidity > 95 % Warm up P Conducting atmosphere Use filter Forbidden Conditions D C Corrosive atmosphere E Explosive atmosphere 1 - Installation 1.5 PANEL MOUNTING 1.5.1 INSERT THE INSTRUMENT 1 Prepare panel cut-out 2 Check front panel gasket position 3 Insert the instrument through the cut-out 1.5.2 INSTALLATION SECURING 1 Position the mounting 2 Push the mounting clamps towards the panel surface to secure the instrument 1.5.3 CLAMPS REMOVING 1 Insert the screwdriver in the clips of the clamps 2 Rotate the screwdriver 1 3 2 12 1 2 1 1.5.4 INSTRUMENT UNPLUGGING B 7 1 Push and 2 pull to remove the instrument Electrostatic discharges can dam- age the instrument Before removing the instrument the operator must discharge himself to ground 1 1 2 1M. 2 - Electrical 2 ELECTRICAL 2.1 TERMINATION UNIT B CONNECTIONS 7 8 9 10 11 12 mA mV 1 TCO...