Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Blaupunkt Dateigröße: 1.18 mb Dateiname: Unterrichtssprache:

The unit reverts to the programme previously listened to when the traffic announcement is over. Switching traffic information priority on/off . Press the TRAF button ?. Priority for traffic announcements is activated when the traffic-jam symbol lights up on the display. Note: You will hear a warning tone, . if you leave the reception area of a traffic information station to which you are currently tuned in; . if you leave the reception area of a traffic information station when you are listening to a CD and the subsequent automatic search cannot locate a new traffic information station; . if you retune the radio from a traffic information station to one that does not broadcast traffic information. Either deactivate the priority for traffic information or switch to a station which broadcasts traffic information. Setting the traffic announcement volume . Press the MENU button 8. . Press the or button : repeatedly until “TA VOLUME” appears on the display. . Use the or button : to set the desired volume. . Once the setting is completed, press the MENU button 8 or OK ; twice. Note: . You can also adjust the volume during a traffic announcement for its duration by using the volume control 2. Note: . You can also adjust the tone and volume balance for traffic announcements. Please see the “Tone and Volume Balance” section. ENGLISH 39 CASSETTE MODE Cassette Operation Cassette Play . If there is no cassette in the device . Press the button 9. The flip-release panel opens. . Insert the cassette into the cassette slot with the open side to the right. . Close the control unit. The cassette starts playing with the side that is facing upwards. . If there is already a cassette in the device . Press the CD•C button @ until “CASSETTE” appears in the display. The cassette is played in whichever direction was last selected. Cassette Ejection . Press the button 9. The flip-release panel opens and the cassette is ejected. . Remove the cassette and close the release panel or . Insert a new cassette. Changing Direction of Play To change between SIDE A and SIDE B . Press button 2 >. Note: . At the end of the tape, the direction of play is automatically reversed (auto-reverse). Skipping Tracks (S-CPS) To skip to the next or a later track . Press the button : one or more times. “CPS FF” and the number of tracks to be skipped appear in the display. The tape fast forwards to the next track or the chosen later track. To skip track backwards . Press the button : one or more times. “CPS FR” and the number of tracks to be skipped appear in the display. The tape is rewound to the start of the present track or the desired earlier track. Playing a Track Repeatedly . Press button 4 RPT >. The present track is repeated. RPT shows in the display. While the tape is being rewound after the end of the track, “REPEAT TRCK” appears in the display. To stop repeating the track . Press button 4 RPT > again. Play continues as normal. RPT disappears from the display. CASSETTE MODE Sampling All the Tracks on a Cassette (SCAN) . Hold down the OK button ; for longer than two seconds. “CAS SCAN” appears in the display. Samples from all the tracks on the tape are played in ascending order. To halt the scan . Press the OK button ; a second time. The track that is currently being sampled will continue playing. Note: . The duration of samples can be adjusted. Refer to the section on “Setting Sample Time” under “Radio Operation”. . To use the S-CPS, RPT and SCAN functions, there must be a pause of at least three seconds between the tracks on the cassette. Fast Winding Fast forward . Press the button :. “FORWARD” appears in the display. Fast rewind . Press the button :. “REWIND” appears in the display. Stopping fast winding . Press the OK button ;. Play continues. Note: . While the tape is being fast wound, the last radio station tuned in can be listened to. This requires the “Radio monitor” function to be switched on. Pausing During Play To interrupt tape play . Press button 3 >. Play is interrupted and “PAUSE” appears in the display. . Press button 3 > again to resume play. Switching the Radio Monitor On / off Note: . The radiomonitor can only be set if a cassette is being played. . Press the MENU button 8. . Press the or button : until “RM ON” or “RM OFF” appears in the display. . Press the or button : to switch the radio monitor on or off. . Press the MENU button 8 or OK ;. ENGLISH 41 CASSETTE MODE Skipping Blank Tape You can automatically skip sections of blank tape that last longer than 10 sec- onds.This requires the blank skip function to be activated. Note: . The blank skip can only be set if a cassette is being played. Switching Blank Skip On / Off . Press the MENU button 8. . Press the or button : until “BLANK SKIP” appears in the display. . Press the or button : to switch the blank skip function on or off. . Press the MENU button 8 or OK ; twice. Selecting Tape Type If you are playing a “Metal” or “CrO2” tape, you should set the tape type selector to “M...

Herunterladen

Geben Sie zwei Ziffern: