Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Press the SELECT but ton to enter the new fre quency setting, or press the MENU button to return to the menu Frequency Setting 89.3MHz options page with no change to frequency. Confirm Tone Option When this mode is entered, you are provided with an On or Off option whereby you can select whether or not a confirmation tone will be heard each time a preset button is pressed or an alert sounds. When the option is highlighted, press the SELECT button to enter. Confirm Tone Option On Off -16 Lock Option When this feature is selected, the following options appear on the display: Lock/UnLock Edit Code Lock Option Lock / Unlock Edit Code Upon entering this mode, the user is prompted to enter a four digit numerical code that is used to lock/unlock channel access. Once the code has been entered, press the SELECT button; the channel list will be displayed with the current channel in play highlighted. Use the Channel Up/Down buttons to navigate the list and highlight the channel to be adjusted. Lock Options Enter Code Lock Options * *** Enter Code Once a channel has been highlighted, pressing the SELECT button displays a check mark (..) next to the channel and prevents the channel from being accessible during any of the tuning modes. Locked channels can be accessed only by direct channel number entry, at which time the user will be prompted to enter the previously stored 4-digit code. Once the correct code has been entered (SELECT), the audio begins to play. The channel returns to the locked status if the channel is changed or the vehicle/unit is turned off (or by returning to this menu and going through the same process to return the channel to the list). Lock/Unlock Default Code Function The first time the lock/unlock function is accessed, the user must enter the default lock code. The default lock code is “0000”. This code can be maintained or changed. To change the default lock code perform the following procedure: 1. Press the MENU button to access the Main Menu. 2. Use the Channel Up/Down buttons to highlight the Lock Option and press the SELECT button. 3. Use the Channel Up/Down buttons to highlight Edit Code and press the SELECT button. 4. Enter the default code 0000 and press the SELECT button. 5. Enter new code using buttons 0-9. -17 Lock Options Enter Code Lock Options * *** Enter Code Lock Options New Code Lock Options * *** New Code Lock Options Enter Code Lock Options * *** Enter Code Lock Options New Code Lock Options * *** New Code 6. Press the SELECT button. 7. Confirm the new code using buttons 0-9 and press the SELECT button. 8. The lock code is now changed. Antenna Aiming (Home Installation) Upon entering this mode, two 7-segment vertical bar graphs are displayed representing terrestrial (tower) and satellite transmitters. The signal strength is displayed by the respective graph segments. Position the antenna to optimize either the satellite or terrestrial signal. Antenna Aiming The current setting is indicated by number of bars in the graph. Moving the antenna location should maximize the number of bars in the respective graph, thus ensuring optimum reception. To exit this function, press the SELECT Button. NOTE: Terrestrial repeaters are typically used in large urban areas where structures may affect the line of sight satellite signal. Terrestrial signals may not be available in your geographic location. Channel Add/Skip Upon entering this mode, a channel list is displayed with the current channel in play highlighted. Use the Channel Up/Down buttons to navigate the list and highlight the channel to be adjusted. Channel Add/Skip 4 The 40s 5 The 50s 6 The 60s 7 The 70s Channel Add/Skip 4 The 40s 5 The 50s 6 The 60s 7 The 70s Channel Add/Skip 4 The 40s 5 The 50s 6 The 60s 7 The 70s -18 Once a channel has been highlighted, pressing the SELECT Button displays a check mark (..) next to the channel, and prevents the channel from being accessible during any of the tuning modes. Skipped channels can only be accessed either through direct channel number entry or by returning to this menu and going through the same process to return the skipped channel to the list. Upon adding a channel, the check mark is removed from alongside the channel number/name. Memory Options In this mode, the user can turn the Memory Search Function (T SEL) ON or OFF. In addition, all 30 Memory Locations can be cleared. On the display, the top line displays the text,Memory Options. The following adjustment options are possible: 1. Clear all Memory Locations. Press the SELECT button; a prompt display screen appears confirming Are You Sure? Select Yes or No and press the SELECT button. 2. T Select On/Off Options: -All Off, All On, User Selected Only On. 3. T Select Search Options: -All, Artist Name, Song Title Clear All Memory Yes No Clear All Memory NoConfirm NoYes Clear All Memory NoConfirm NoYe YeYe s ss Time Options The following adjustments are possible: Clock Set Alarm Sleep Mode Upon entering this mode, use the Channel Up/Down ...