Stimmen - 4, Durchschnittliche Bewertung: 4.8
(
)
)
|
Anleitung Zusammenfassung
2 Antennas CB Antenna.......................................................................................6 Marine Installation .........................................................................6 Ignition Noise Interference ..........................................................7 Operating Your 29 NW ST Turning On Your CB........................................................................ 8 Setting Channel Selector ............................................................. 9 Calibrate For SWR (Standing Wave Ratio) ..............................10 To Receive..........................................................................................12 Selecting a Channel.......................................................................13 S-Meter ...............................................................................................13 SoundTracker ™ System ................................................................14 Activating SoundTracker ™ ..........................................................15 NB-ANL/ANL/Off (Noise Blanker/Automatic.........................16 Noise Limiter Switch) Tone Hi/Nor.......................................................................................17 RF Gain Control................................................................................17 Dimmer Switch ................................................................................18 Setting Squelch ...............................................................................18 To Transmit........................................................................................20 Setting Dynamike...........................................................................20 Transmit..............................................................................................21 RF Meter .............................................................................................22 External Speaker .............................................................................23 PA (Public Address) ........................................................................24 Home And Office Set-Up .............................................................26 Temporary Mobile Set-Up ...........................................................27 How Your CB Can Serve You..........................................................28 A Few Rules You Should Know ..................................................28 Channel 9 Emergency Messages..............................................28 CB 10 Codes......................................................................................30 Frequency Ranges.............................................................................32 29 NW ST Specifications.................................................................33 Warranty Information .....................................................................34 Optional Accessories.................................................................35-36 Features of This Product • 40 CB Radio Channels •SoundTracker ™ System •Heavy-Duty Dynamic Microphone •Full 4 Watts AM RF Power Output • SWR Calibration Meter • Instant Channel 19 and 9 •Front Panel 4-Pin Microphone Connector •Delta -Tune •Switchable Automatic Noise Limiter & Noise Blanker •Adjustable Dynamike Boost •Tactile Controls • Illuminated Front Panel •Dim Control • RF Gain •9 ft. Mic Cord CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ! InstallationInstallation Location 32 Mounting and Connection Mounting and Connection Hold the radio with the mounting bracket in the exact desired location. If there is no inter- ference, remove the bracket and use it as a template to mark the location for the mount- ing screws. Location Plan location of transceiver and microphone bracket before starting the installation. Select a location that is convenient for operation, yet does not interfere with the driver or passenger. The transceiver is usually mounted to the under- side of the dash with the microphone bracket beside it. Note The transceiver is held in the universal mounting bracket by two thumbscrews which allow for adjustment at a convenient angle. The bracket includes two self- tapping screws and star wash- ers. The mounting must be mechanically strong, conve- niently located. continued Drill the holes and secure the bracket. 2 1 Connect the antenna cable plug to the recep- tacle marked “ ANT” on the back of the unit. 3 ANT PA.SP. EXT.SP. + POWER– DATE OF MFG : JUNE 98 FCC ID:BBO3K229LTD COBRA MADE IN CHINA SERIAL NO.: 806135776 PRECISION ENGINEERED PRODUCT OF COBRA ELECTRONICS CORP. CHICAGO, ILL.60707 ANT PA.SP. EXT.SP. + POWER– DATE OF MFG : JUNE 98 FCC ID:BBO3K229LTD COBRA MADE IN CHINA SERIAL NO.: 806135776 PRECISION ENGINEERED PRODUCT OF COBRA ELECTRONICS CORP. CHICAGO, ILL.60707 Installati...