Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: La Crosse Technology Dateigröße: 173.49 kb Dateiname: Unterrichtssprache:

Press and release the MODE/SET button to confirm and continue to the next menu item. . DST: DST (Daylight Saving Time) will flash with ON or OF in the second display. Press and release the PLUS button or the MINUS button to turn the DST indicator OF (off) or ON. This indicator is defaulted to ON and will only need to be turned off is you live in an area that does not observe DST. Press and release the MODE/SET button to confirm and exit the program menu. OTHER SETTINGS: begin from normal time display. 12/24-HOUR TIME: From a normal display press and release the 12/24 button to switch from 12-hour time format to a 24-hour time format. WWVB SEARCH: Hold the tower button for 5 seconds to activate the WWVB signal search. Press and release the tower button to turn the search off. RESET: If the display numbers appear jumbled, use a small object such as a paperclip and gently press the RESET button one time. The clock will beep four times then revert to default settings. ALARM SET: Press and release the MODE/SET button once to enter Alarm Mode. “AL” should appear after the alarm time. . HOUR: From Alarm Mode hold the MODE/SET button for 5 seconds and the hour will flash. Press and release the PLUS button or the MINUS button to adjust the hour. Press and release the MODE/SET button to confirm and continue to the minutes. Wall Hanging Holes Function Buttons Battery Compartment Base Stand . MINUTES: The minutes will flash. Press and release the PLUS button or the MINUS button to adjust the minutes. Press and release the MODE/SET button to confirm and exit the alarm set mode. ACTIVATE/DEACTIVATE ALARM: Press and release the AL ON/OFF button to turn the time alarm on. The alarm icon will show above the seconds. Press and release the AL ON/OFF button to turn the time alarm off. The alarm icon will disappear when the alarm is off. SNOOZE TIME: When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 5 minutes. The alarm icon Zz will flash when the snooze feature is active. To stop alarm for one day, press AL button, while in snooze mode. The alarm icon will remain solid. POSITION THE CLOCK: When positioning the clock it is always best to have the front or the back facing Ft. Collins, Colorado for best WWVB signal reception. Wall Mount: Insert three screws (not included) into the desired wall, about 3.9 inches (10 cm) apart. Leave the head of the screws extended out by about 0.2” (5mm). Carefully hang the clock on the screws, using the hanging holes on the back of the clock. Note: Always ensures that the unit locks onto the screws before releasing. Table Stand: Pull out the table-stand from the rear of the clock. Pull out from the bottom. Place on table or desk as desired. SPECIFICATIONS: Dimensions: 15.35 inches H x 19.09 inches W x 1.57 inches D (39 cm H x 48.5 cm W x 4 cm D) Power: Requires three “C” IEC LR14 alkaline batteries (not included). CARE AND MAINTENANCE: . Replace batteries promptly when needed. Important: . Do Not Mix Old and Ne...

Herunterladen

Geben Sie zwei Ziffern: