Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
FM ANTENNA: FM antenna is available for better reception. The antenna is located in the rear of the unit. TURNTABLE: Lift the lid of your 3-in-1 Classic Radio and access the TURNTABLE to play your classic vinyl record collection. RECORD PLAYER-ARM: Use the record player’s RECORD PLAYERARM to produce quality sound from your vinyl records. 7 Using Your 3-in-1 Classic Radio REMOVE SCREW Your 3-in-1 Classic Radio can tune into AM/FM radio stations, play CDs, and it also lights up. First, unpack all parts and remove protective packing around unit. Then plug the cord into an electrical three prong outlet. To listen to the record player: Follow these steps carefully: 1. There is a screw protecting the record players TURNTABLE. Remove screw as shown in Figure 1. If this is not removed, you will not be able to play any records. 2. Turn the power on. 3. Slide the MODE switch FIGURE 1: There is a screw protecting the record players cabinet. Remove screw as shown above. If this is not removed, you will not be able to play FIGURE 2: Slide the MODE switch any records. (RADIO/PHONO/CD) to PHONO. 8 FIGURE 3: Select record speed- 33/45/78. (RADIO/PHONO/CD) to PHONO, as shown in Figure 2. 4. Select record speed33/ 45/78. See Figure 3. 5. Place a record onto the turntable (use the 45 RPM adapter provided, when playing a single.) 6. Lift the RECORD PLAYER-ARM from the arm-rest holder. See Figure 6. 7. Lift the QUE-LEVER and move the RECORD PLAYER-ARM gently to the desired position over the record. 8. Lower the QUE-LEVER slowly to meet the record’s surface. 9. Turn the VOLUME control knob clockwise to turn unit on. Adjust the volume by turning the VOLUME knob. 10. To stop the record, lift the RECORD PLAYER-ARM away from the surface of the record and return it to its resting place. 9 RECORD PLAYER-ARM QUE-LEVER FIGURE 4: Lift the tone arm from the arm-rest holder. Lift the QUE-LEVER and move the RECORD PLAYER- ARM gently to the desired position over the record. TURNTABLE FIGURE 5: Select AM or FM in the Radio mode. AM/FMSWITCH Rotate and move the antenna To listen to the radio: until you receive clear radio 1. Turn the Power ON. reception. 2. Slide the MODE switch (RADIO/PHONO/CD) to RADIO. To turn off the radio: Select AM or FM. See Figure 5 Turn the VOLUME control knob above. counter-clockwise to turn unit off. 3. Turn the TUNING knob until you find your desired radio station. 4. Turn the VOLUME control knob clockwise to turn unit on. Adjust the volume by turning the VOLUME knob. 5. For optimal reception, stretch the built- in FM antenna out to is fullest extension (See Figure 6). You will find the antenna at the lower back portion of your 3-in-1 Classic Radio. ANTENNA FIGURE 6: For optimal reception, stretch the built-in FM antenna out to is fullest extension. 10 FIGURE 9: Pressing PAUSE/PLAY but- ton will have the CD’s track number and indicator lights blink. Once play is resume the flashing will stop. FIGURE 7: Slide the MODE switch (RADIO/PHONO/CD) to CD. To play a CD: Follow these steps carefully: Loading the disc Press the OPEN/CLOSE button 1. Turn the Power ON. to open the CD compartment. Insert a CD into the disc tray. 2. Slide the MODE switch Make sure the CD is put into tray (RADIO/PHONO/CD) to CD. See with printed side up. Close the Figure 7 above. CD door. See Figure 8. 4. Press the OPEN/CLOSE but5. Press the PLAY/PAUSE button to close the CD door. After a ton to begin playing your CD. while, the display shows the CD Press the STOP button to stop total number of tracks and total playing your CD. Press the and playing time. First turn the PLAY/PAUSE button to pause VOLUME control knob clockwise your CD. to turn the unit on. Slide the MODE switch to CD. FIGURE 8: Press the OPEN/CLOSE button to open or close the CD door. Insert a CD in to the disc tray. 11 FF (FAST FORWARD) FW (REWIND) FIGURE 10: When using FF (UP) and FW (DOWN) buttons forward or reverse you will hear your selection playing at a distorted speed. 6. Press the FF (UP) button to skip ahead to the next track or to scroll quickly through the current track. NOTE: Do not push both FF (UP) and FW (DOWN) buttons together as this may damage the unit. When using FF (UP) and FW (DOWN) buttons forward or reverse you will hear your selection playing at a distorted speed. See Figure 10. Simply release the FF (UP) or FW (DOWN) buttons to continue playing at normal speed at the desired position of the CD. 7. Press the FW (DOWN ) button to go back to the previous track or to scroll quickly back12 wards through the current track. 8. To replace or remove a CD, press down on the center of the CD lid and carefully lift the CD out. Carefully hold the CD by the edge to avoid fingerprints. Precautions: If the CD is scratched, dirty, or in-correctly placed on the disc tray, it may not play properly. Bear in mind the following points since any dirt; scratches or warping of the disc can cause broken or intermittent sound and noise. When holding the discs, take care not to touch...