Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
3 Getting started ...................................................... 6 Batteries ............................................................ 6 AC power adapter ............................................. 6 Switch between modes ..................................... 6 Change settings ................................................ 6 Clock .................................................................... 7 Alarm .................................................................... 8 Calendar ............................................................... 9 Barometer ............................................................. 9 Weather forecast ................................................... 11 Backlight ............................................................... 11 Projector ............................................................... 11 Reset system ......................................................... 12 Safety and care ..................................................... 12 Warnings ............................................................... 12 Troubleshooting ..................................................... 13 Specifications ........................................................ 14 Additional resources .............................................. 16 1 EN ABOUT THIS GUIDE Congratulations on your selection of the Philippe Starck with Oregon Scientific Radio Controlled Clock with Barometer and Projection (PS-S02/PS-S02U). This powerful device bundles time keeping, alarm, barometric trend, weather forecast, and projector features into a single tool you can use from the convenience of your home. Keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know. In this box, you will find: • Main unit • Batteries • AC power adapter 2 EN DESCRIPTIONS PRODUCT OVERVIEW 1. Snooze/Light button ( 8, 11, 12) TOP AND BOTTOM VIEWS 2. Projection lens ( 11) 3. Reset button ( 6, 12) 4. DC power input jack ( 6) 1 5. Battery compartment ( 6) 2 3 4 5 3 EN LCD DISPLAY DESCRIPTIONS 1. Low battery icon ( 6) 2. Clock ( 7) 3. Weather forecast ( 11) 4. Calendar ( 9) 5. Radio signal icon ( 7) 6. Barometer ( 9) 7. Alarm ( 8) 4 EN BACK VIEW BUTTON DESCRIPTIONS 1. Up – increase setting / activate auto-synch ( 7) 2. Down – decrease setting / deactivate auto synch ( 7) 3. Select – switch modes / change settings ( 6) 4. Focus –focus projector ( 12) 5. Alarm –activate / deactivate alarm ( 8) 1 3 4 2 5 5 EN GETTING STARTED BATTERIES Batteries are supplied with this product. Replace them whenever the low battery signal ( ) displays. Remove the compartment lid on the bottom of the unit. Be sure to match the correct polarity, as shown in the battery compartment. Before you close the lid, press the RESET button with the point of a blunt object (such as a ball point pen). NOTE Do not use rechargeable batteries. AC POWER ADAPTER An AC power adapter is supplied for use with the main unit. You must connect the power adapter if you wish to use the continuous projection feature. The jack is located in the battery compartment. NOTE If the AC power becomes unavailable, the unit will automatically switch to battery power. SWITCH BETWEEN MODES Press SELECT. The selected mode will flash. The display will stop flashing if no key is pressed within 5 seconds. CHANGE SETTINGS Press and hold SELECT for 2 seconds. Then, press UP or DOWN to change each setting. Press SELECT to switch between options. 6 EN CLOCK This product can automatically synchronize the date and time with official time-keeping organizations in Frankfurt, Germany (PS-S02) or Rugby, England (PS-S02U). When the unit is within 1500 km (932 miles) of a RF signal, the reception icon will blink. RECEPTION Reception takes 2 – 10 minutes to complete. Once complete, the icon will stop blinking. Strong signal Weak signal No signal NOTE For best results, place the unit away from metal or electrical objects, and near a window with a clear view to the sky. TO DISABLE OR ENABLE AUTO-SYNCHRONIZATION In Clock mode, press DOWN for 2 seconds to disable the auto-synchronization. The unit will not respond to radio signals until you reactivate the synchronization. To enable auto-reception, press UP for 2 seconds. 7 EN SET OR CHANGE THE CLOCK 1. Press SELECT to switch to the Clock Mode. The time will flash. 2. Press and hold SELECT for 2 seconds to enter the setting mode. 3. Select the 12/24-hour format, hour, and minute. Press UP or DOWN to change the setting. Press SELECT to confirm. ALARM When activated, the Beep Alarm starts quietly, then gradually becomes louder. It shuts off at two minutes. The LCD display lights up for the first 8 seconds. SET ALARM 1. Press SELECT several times until the Alarm area flashes. 2. Press and hold SELECT for 2 seconds to enter the setting mode. 3. Select the hour and minute. Press UP or DOWN to change the setting. Press SELECT to confirm. 4....