Stimmen - 5, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
You can set each alarm time to way. Alarm time setting ———---—- 1 Press and hold the alarm 1 (or 2 While pressing the alarm 1 (or 2) display/adjust button. 2) display/adjust button, press The clock display shows " | p ; Q jj ”. 2nd hold time set buttons until desired wake-up time appears on the clock display. Make sure the AM or PM setting is correct. Release the alarm 1 (or 2) display/adjust button, and the present time is restored on the clock display. To make sure of the preset time, press the alarm 1 (or 2) display/adjust button again. Operation for Dual Wake-Up System (continued) Radio alarm (ALARM 1)-- "1 Press the alarm 1 select but- 4 Press the off/time set button, ton, Ttie alarm 1 indicator will light up. At the set wake-up time, the radio alarm will activate. Set the desired wake-up time The alarm will shut oft automatically in on alarm 1. about 59 minutes. (See page 13.) To shut off the alarm before automatic O Tune in the desired broadcast- shut-off, press the off/time set button, ing^station. (See page 8.) Tape alarm (ALARM 1) 1 Press the alarm 1 sclect button. The alarm 1 indicator will light up. 2 Set the desired wake-up time on alarm 1. (See page 13.) 3 Insert th^ cassette tape. (See page’10.) 4 Press the play button. At the set wake-up time, the tape alarm will activate. ■ •To shut off the tape alarm, press the slop/eject button. The tape play stops and the radio alarm will continue automatically. •The alarm will shut off automatically in 59 minutes. When the tape reaches the end during playback, the automatic stop system will release the playback button and the radio alarm wi!! continue automatically. •To shut off the alarm before automatic shut-off, press the off/time set button. Operation for Dual Wake-up System (continued) Buzzer alarm (ALARM 2) -- "1 Press the alarm 2 select but- At the set wake-up time, the buzzer ton, alarm will activate. The alarm 2 indicator will light up. The alarm will shut off automatically in about 59 minutes. 2. Set the desired wake-up time on alarm 2. the alarm before automatic (See page 13.) shut-off, press the off/time set button. Combination of the alarm 1 and the alarm 2 The buzzer alarm and the radio (or tape alarm) are set at the same time. Both alarms will activate simultaneously. Example Set the wake up time for weekday on the alarm 2, and for weekend on the alarm 1. ALARM 2...ÇUZZER Note: The alarm will activate automatically at the same time every day. Make sure to set the alarm select button to "OFF" when you want to Cancel the alarm. Combination of the alarm 1 and the alarm 2 permits the following convenience. Wake-up time {or weekend ALARM 1... RADIO/TAPE ALARM 2...OFF 12 Special Features Doze operation —— When the alarm activates, but you do not wish to wake up immediately, press the doze button. The alarm wif! be quiet for 7 minutes, then the alarm will operate again. If you do not need doze time and want to cancel the alarm, press the off/time set button. While pressing the doze button, the seconds will also appear. (At this time, the clock display changes from hours and minutes to minutes and seconds.) 15 Radio sleep timer You can set the clock radio to play up to about 59 minutes, and then to shut off automatically. Press and held the sleep button until the length of time for which you wish to listen to the radio is shown on the clock display. Watch the display as it counts backwards from 59 to 00. At first, the clock display shows 59 minutes. When you release the sleep button, the Correct time returns on the clock display. During radio-listening, you can confirm the number of minutes remaining by pressing the sleep button and looking at clock display. You can change the length of time, for which you wish to listen to the radio, by the time set buttons while pressing the sleep button. Radio will be shut off automatically in the preset steep time. To cancel the sleep timer and shut off the radio, press the off/time set button. Special Features (continued) Radio sleep timer and alarm You can set the clock radio to play for the desired time (up to 59 minutes) and shut off automatically, then activate the alarm automatically at the desired wake-up time. 1 Set the desired wake-up time and press the desired alarm select button (alarm 1 select button or alarm 2 select button). 2 Set the desired length of time for which you wish to listen to the radio. (See page 19.) 2Q / .y Maintenance The head assembly, capstan and pressure roller are in constant contact with the tape. If these parts are dirty, the sound quality will be impaired. Periodically, clean these parts as shown above. 1. Open the cassette compartment cover by pressing the stop/eject button. 2. Press the.pJay button. The playback head, capstan and the pressure roller can be seen. Clean them with a cotton swab. If the head assembly is extremely dirty, clean it with a soft cloth dampened with a little alcoho...